pharaoh fortune slot
Welcome, Guest. Please login or register.
December 15, 2018, 04:10:14 PM

Login with username, password and session length
* Home Help Search Login Register
  Show Posts
Pages: [1] 2 3 ... 10
1  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / Workgroup and a shared printer on: April 24, 2007, 10:03:40 PM
Workgroup correct
2  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / Workgroup and a shared printer on: April 24, 2007, 10:02:23 PM
Here is the setup:

2 WinXP Home Desktops
1 WinXP Pro Desktop
1 Windows 2003 Server Enterprise

All in a worksgroup named MSHOME.

Just installed the win2k3 server and setup it up as a printer server and file server.  Installed a HP officejet on it and shared it out.  All computer can browse find the server, see the shared printer a connect to it.  Prior to connecting to it though it asks for authentication (username/password).  Used the admin account to to auth and then the printer driver installed printer shows up and test pages prints.  Printing there after works just finde.  Prior to this the other half says that the shared computer (WinXP Pro) that was sharing the printer to the other computers never asked to authenticate to the printer, or view shared file and folders.

My question is, can it be configured to allow users who are working from the WinXP Pro and WinXP home computer to print with out requiring the user to browse to the server listed in workgroup and then authenticate each time prior to printing?

I made sure the everyone group has full access to the printer.

Any thoughts?

Also, on the WinXP Pro simple file and print is turned off.
3  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / IP and subnetting on: October 07, 2005, 11:01:53 AM
Sometime ago (over a year) there was a post that provided a link to a site that covered IP classifications, subnetting, and provided detailed information about this topics.  Kind of a how to guide in figure available IPs etc etc..

Does anyone know of the site I'm talking about and could post a link?

Or maybe post some links to site you may have come across that would be helpful.  Sites that kind of give a 101 on IP / subnetting / to adv.

4  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / setup boot disks on: October 07, 2005, 10:59:09 AM
Can you boot to a command prompt and change directories to your CD-ROM drive and the browse to the I386 directory and run winnt or winnt32 commands depending on installed OS?

That would be my next suggestion.
5  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / setup boot disks on: October 04, 2005, 10:31:00 AM
windows 2003 boot disk
6  General discussions / General Discussion / Question on MCSE BOOKS on: October 19, 2004, 12:27:19 AM
Does anyone happen to know if any publisher puts out the MCSE study guide in a spanish version??

Thanks for any info..
7  Other IT certifications / Linux/Unix / Windows and UNIX on: August 12, 2004, 05:27:55 PM

UNIX server where .zip files are stored centrally.

I'm trying to restore these files into a software from a windows PC.

Does anyone know what client utility I will need to allow my to browse to the location on the UNIX server and then pull the .zip files across the network?

Also, will the files be recognized? Will the files need to be converted from ASCII?

any help would be great.

8  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-217 / Question on DNS. on: March 02, 2004, 11:10:15 PM
Side note the 169.168.xx.x is in a DMZ.

How much of an effect does that pose?
9  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-217 / Question on DNS. on: March 02, 2004, 10:23:58 PM
I'm trying to troubleshoot this and can't seem to get it working.

This box has an ip of 192.168.xx.x (internal ip)

Then FQDN of the box is

When I run nslookup on
it resolves to ip: 216.26.169.xx  (which is the external ip)

When I run nslookup on mybox it resolves to
ip: 216.26.169.xx

When I run nslookup on the ip of 192.168.xx.x it fails to return.

I'm trying to determine what in DNS I would need to configure to ensure that 192.168.xx.x also resolves to

is this possible??

10  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-217 / nslookup on: March 02, 2004, 06:51:37 PM
Anyone have a good site or information on using nslookup? How it's used etc.....

11  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / Question on installing apps on 2003 on: February 09, 2004, 06:18:43 PM
Does anyone know how to use emulation mode for installing an application on 2003 server?  I wanted to run the installation as if I was installing on 2002.
12  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-216 / DNS Service on: January 19, 2004, 08:11:37 PM
Then query worked
13  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-216 / DNS Service on: January 19, 2004, 08:10:50 PM
I had the same issue sometime ago..  What if any service packs have you installed??

In my test network I had to install SP2 on the member server to correct the problem.

let me know if that helped
14  Microsoft (MCSE, MCSD, MOUS, MCAD) / 70-215 / SOS! Formatting F:\ drive instead of E:\ by mistake! on: January 08, 2004, 01:03:20 AM
Going to post the info from the link mohmedsh1 posted..

User from that post used this to recovery files.


File Recovery is a data recovery program that supports the FAT 12/16/32 and NTFS file systems. The current version 3.x replaces the previous version 2.x, which is now over 6 years old.

For 9x/NT/2K/XP. Restore deleted files that are no longer in the Recycle Bin!

Tool to check and undelete partition
Works with the following partitions:
- FAT12 FAT16 FAT32
- Linux
- Linux SWAP (version 1 and 2)
- NTFS (Windows NT)
- BeFS (BeOS)
- Netware
- RaiserFS


EasyRecovery DataRecovery is a simple, yet powerful tool that recovers data that is lost, inaccessible or deleted. It's the ultimate do-it-yourself solution for nearly all causes of data loss (except physical hardware or system problems) where your hard drive and system are fully functional.

File Rescue 2.5

GetDataBack for FAT
GetDataBack will help you retrieve your files if the hard drive's partition table, boot record, FAT, or root directory have been damaged by a virus, formatting, fdisk or power failure. GetDataBack can even recover your data when the drive is no longer recognized by Windows.

GetDataBack for NTFS
Recover your files when the data is no longer accessible due to formatting, fdisk, virus attack, power or software failure. Get everything back even when the drive's partition table, boot record, Master File Table or root directory is lost or corrupt.
Hard Drives
Floppy Drives
Drive Images
Zip/Jaz Drives

Norton Utilities/SystemWorks
The Norton Protected Recycle Bin helps you recover deleted and overwritten files.
The UnErase wizard helps you retrieve files you've accidentally deleted.


Data Recovery
Fast File Undelete


File Recover 2000


File Restore
If you've deleted your data and you want to get it back, you need FileRestore.
FileRestore is a simple, easy-to-use tool for recovering files that have been lost or deleted from your Windows system. Designed for Windows XP, 2000, NT, Me, and 9x

Disk Commander
In virtually any situation where you need to recover lost data from a Windows system, Disk Commander is the solution. Disk Commander performs a wide range of data recovery operations.

As a tool to 'UNDELETE' files that have been accidentaly deleted.
This feature is implemented for HPFS and NTFS only.


Emergency Undelete
I believe this is free
For Win2000 and NT may work on XP


Hard Drive Mechanic
It's true. Even if you just re-formatted your entire hard drive, you can still get all of your data back because, unlike what most people believe, formatting does NOT erase your files! With Hard Drive Mechanic's Unformat Feature, you can restore all of your valuable data in about 10 minutes!
demo version:

Filerecovery for Windows
Filerecovery for Windows?« is a safe and affordable do-it-yourself data recovery solution that is designed to recover deleted files from all types of media such as Hard Drives, Floppy Drives, SmartMedia, CompactFlash, Memory Sticks, and other types of removable media.

You know how upsetting it is to accidentally delete a file that you needŌĒöit takes just a moment to lose hours of work. Undelete file-recovery utility captures ALL deleted files including those that typically bypass the Recycle Bin. You can even recover files you purged from our Recovery Bin. With our Emergency Undelete feature, you can recover files deleted prior to Undelete being installed on your system (provided they have not been written over). Buy Undelete and you'll never again be at the mercy of lost data.

Fast File Recovery
A definite must for the PC guru! It will allow the user to perform all data recovery tasks associated with disks which are not physically damaged.

File Scavenge
File Scavenge is the most comprehensive, award-winning file undelete and data recovery for NTFS volumes on Windows NT, Windows 2000 and Windows XP.

Active UNERASER is a compact and powerful undelete utility that can recover deleted files and folders on FAT12, FAT16, FAT32 and NTFS systems. It can even restore files from deleted and re-formatted partitions.

Undelete 3.0
Undelete 3.0 restores accidentally deleted files within seconds from anywhere on your system. Version 3.0 includes new SecureDelete, full Windows XP support and expanded search options.

FinalData Data Recovery
FinalData Data Recovery Solution will recover files that have been lost by   quick formatting, FDISK, FAT damage, MBR damage or directory   destruction. It recovers data from FAT12/16/32, NTFS, and EXT2, EXT3.

hope it helps
15  Other IT certifications / Oracle certifications / Small Scale Oracle installation. on: December 11, 2003, 02:27:33 PM
I was curious if anyone out there know of were I may find some information/documenation on installing Small Scale Oracle.

I'm really looking for something regarding setting up enviromental variables.

Pages: [1] 2 3 ... 10
Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!