pharaoh fortune slot
Welcome, Guest. Please login or register.
December 19, 2018, 03:39:21 AM

Login with username, password and session length
* Home Help Search Login Register
  Show Posts
Pages: [1]
1  General discussions / Hardware / Can't detect hdd on: January 08, 2007, 11:21:02 PM
you must be seeing things - there's no fighting from this side of the fence Cheesy
2  General discussions / Hardware / Can't detect hdd on: January 08, 2007, 03:21:36 AM
I didn't post BS advice. I admit I posted incomplete advice. BUT THEN I SAID THAT.

At no point have I "slammed" you. Instead I pointed out my usage of sic (why would you presume it was slang) and then added in definitions for words. If that's slamming you back, well then I apologise as it was never that.

The thread is there for all to see and reach their own conclusions. As I said previously, I don't need to justify myself and I won't be indulging in any personal attacks.
3  General discussions / Hardware / Can't detect hdd on: January 07, 2007, 04:17:15 AM
I was going to reply in a similar vein but you are obviously someone who doesn't read other peoples posts fully first before jumping down the throats .... and I neither need, nor do I have to justify myself to you.

Instead, let me point just point you at these three pages:

sic =

Duel =

Dual =
4  General discussions / Hardware / Can't detect hdd on: January 03, 2007, 01:34:40 AM
That's utter drivel. :p

You are right in that the drive positioning is really only needed for when using Cable Select (CS) - however I said this so as to make it easy on oneself should they then go CS. Might as well start off as one means to go on.

But if you are saying that WD drives HAVE to be master when in a duel drive setup, then that is just so wrong.

OK, I'll accept that your personal experience has led you to that conclusion but to put it out as if it's gospel is just so wrong.

I would suggest if anything your BIOS is out of date and requires an update if that is your experience or you have another problem. In 23yrs of maintaining computer equipment I have never experienced the problem you describe with any WD nor any other make of hard drive.

5  CompTIA / A+ forum / Slippy Shoots Scores !! on: December 24, 2006, 10:05:52 PM
Well done ... me, working on my CCNP and would like to redo my Checkpoint certs as well.
6  CompTIA / A+ forum / Test Taking Symptoms ! What's are yours ? on: December 24, 2006, 10:04:26 PM
stress or over-confidence.

I always believe I'll fail so if I do it's no surprise but when I pass (usually) it's always a tremendous relief and a great joy at my achievement - no matter how tiny the exam ...
7  General discussions / Hardware / Can't detect hdd on: December 24, 2006, 10:02:40 PM
If you use AUTO you need that set on both drives.

You also need to put the master drive at the end of the ribbon cable - or put it another way, the slave needs to be between the mobo and the master drive.

But if it is dead as a master on its own, then I guess it's dead Smiley
8  CompTIA / A+ forum / Wake Up !!!!!!!!!!!!!!!!! on: December 24, 2006, 10:00:09 PM
It requires a core membership that will (and can) answer most any query posted.

Trouble is, nobody has the time, nor is this site unique. If it was, then I suggest there'd be far more posters.

Also, it requires intelligent questions being posed and for the last umpteen months that just hasn't happened.

My 2c ...

9  Microsoft (MCSE, MCSD, MOUS, MCAD) / MCAD / MCSD?? on: December 24, 2006, 09:57:27 PM
If you simply mean what exams do you need to pass to get MCSD then look here:

If on the other hand you mean something else then can you re=phrase your question.

10  CompTIA / A+ forum / Dell Technicians Fixing pc's over broadband ? Is this the end of the Dell Techie ?!?! on: October 20, 2006, 07:08:25 PM
Actually it won't be long before teh Indians start to feel the pinch as they are demanding higher salaries.

They in turn are already starting to outsource to China ...!
11  Microsoft (MCSE, MCSD, MOUS, MCAD) / Server 2003 / i finally made it on: October 16, 2006, 12:29:27 PM
Congrats - now how about rounding out (or even improving) your entire skillset by moving on to non MS products?

You mention the RH stuff but also consider firewalls, cisco, etc ... would make you much more employable. Of course it helps if you can 'practice' these things at work too.
12  CompTIA / Network+ / Howabout anyone still come to Network+ area? on: October 16, 2006, 12:27:09 PM
No convo's worth noting to get anyone active I guess.
13  Other IT certifications / Check Point / which product to practice with? on: October 16, 2006, 12:23:57 PM
The checkpoiunt gui sits atop an OS - so you'll either need a server product or a dedicated box like one of the Nokia IP series - maybe the IP45 as an example. ACost is aything from a few hundred to several more than that dependant on config.


The standalone boxes also have a command line and a web front end that allow you to do certain things that are easier than via the gui.

If just getting the soiftware, then that'll cost whatever, but it will sit atop an OS such as Windows server.
14  CompTIA / A+ forum / Dell Technicians Fixing pc's over broadband ? Is this the end of the Dell Techie ?!?! on: October 16, 2006, 12:17:23 PM
Why bad?

I guess they'll be using a remote desktop tool that allows them to see "what's what" rather than rely on the end user to describe it and not give all the relevant info.

Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!