I have a Cisco Pix 506 firewall all configured and going. Now we are
changing Our ISP and hence we are getting new IP addresses. How I can
reconfigure the Pix 506 with the new IP's. (I just wanted to change
the IP's on the access list and other statements in the pix 506)
Can I just cut and paste the new configuration(access list , etc) from
a text file? And delete the old configuration???
Is there a way to edit the existing IP address on PIX 506 ?
Please let me Know.
thanks

Report this post to a moderator

Best bet is to paste the config into a text file, put "no" infront of the
lines that you need to replace, add the correct line under it and paste it
in.

-D

"santosh" <santosh@aquacom.com> wrote in message
news:9383cf08.0301140721.48a57c1b@posting.google.com...
> I have a Cisco Pix 506 firewall all configured and going. Now we are
> changing Our ISP and hence we are getting new IP addresses. How I can
> reconfigure the Pix 506 with the new IP's. (I just wanted to change
> the IP's on the access list and other statements in the pix 506)
> Can I just cut and paste the new configuration(access list , etc) from
> a text file? And delete the old configuration???
> Is there a way to edit the existing IP address on PIX 506 ?
> Please let me Know.
> thanks

Report this post to a moderator