86.IPX traffic using different encapsulation types can go over the
same data link
A.True
B.False

97.Which statement about the Committed Information Rate (CIP) is
true?
A.It is the rate in bits per second at which the Frame Relay switch agrees to
transfer data
B.It is the clock speed (pod speed) of the connection (local loop) to the Frame
Relay cloud
C.It is the maximum number of bits that the switch can transfer during any
Committed Rate Measurement Interval
D.It is a signaling standard between the 3PE device and the FP switch It is
responsible for managing the connection and maintaining status between the
devices

71.Which three basic switch functions increase available bandwidth on
the networks (Choose three )
A.loop avoidance
B.address learning
c.hop count limiting
D.broadcast filtering
E.packet forward/filtering

117.In which three situations is a hold down timer reset? (Choose
three )
A.when the hold down timer expires
B.when infinity is finally defined as some maximum number
c.when the router exchanges update summaries at area borders
D.when the router detects faulty LSPs propagating through the internetwork
E.when another update is received indicating a new route with a better metric
F.when another update is received indicating the original route to the network
has been restored
G.when the router receives a processing task proportional to the number of
links in the internetwork

103.Which two commands show your access lists? (Choose two )
A.show filters
B.show access-lists
c.show ip access-lists
D.show running-config

102.Given the configuration example
interface ethernet0
ipx network 4a
ipx access group 800 out
interface ethernetl
ipx network 3d
interface ethernet2
ipx network 5c
access list 800 permit 3d 4a
which two actions result from implementing this configuration?
(Choose two)
A.IPX network 5c will not receive any traffic
B.Traffic from network 3d for network 4a will be forwarded out e0
c.Traffic from network 4a for network 3d will be forwarded out e0
D.Traffic from network 3d destined for network 4a will be forwarded out e2
E.The access list is applied to an outgoing interface and filters outbound
traffic

64.What are two purposes for segmenting a network with a bridge?
(Choose two )
A.to reduce collisions
B.to increase collisions
c.to add collision domains
D.to reduce collision domains
E.to have more broadcast domain
54.On a network design project you determine that a new testing
application requires multiple hosts These hosts must be capable of
sharing data between each host and an enterprise server at 10 Mobs
bandwidth Other divisions in the company use applications that require
less than 2 Mobs bandwidth of the enterprise server.What is your most
economical recommendation?.A.That existing 10BaseT hubs be replaced with 1 00BaseT hubs to improve
overall performance
B.That a router can separate the testing application from the rest of the
network thus allowing the testing application more bandwidth
C.That a switch be installed so that the enterprise server can be provided a
100 Mobs pod and each of the testing application hosts can be given
dedicated 10 Mobs pods
D.That a bridge be placed between the enterprise server and all other users
with the exception of the testing application

40.Which commands should you use to enable IGRP routing?
A. router igrp 100
Network 192.168.1.0
Network 10.0.0.0.B. router igrp 100
Network 192.168.2.0
Network 10.0.0.0
C. router igrp 100
Network 192.168.1.0 192.168.1.1
Network 10.2.0.0 10.2.1.1
D. router igrp 100
Network 192.168.1.0 255.255.255.0
Network 10.2.0.0 255.255.255.0

Report this post to a moderator

86.IPX traffic using different encapsulation types can go over the same data link
True.

97.Which statement about the Committed Information Rate (CIP) is true?
A.It is the rate in bits per second at which the Frame Relay switch agrees to
transfer data

117.In which three situations is a hold down timer reset? (Choose three )
(man, this question again...)
A.when the hold down timer expires (because it's obvious)
F.when another update is received indicating the original route to the network has been restored (because the router that originated the route knows what it is talking about)
G.when the router receives a processing task proportional to the number of links in the internetwork (because Todd Lammle says so)

103.Which two commands show your access lists? (Choose two )
C.show ip access-lists
D.show running-config

102.Given the configuration example
...
interface ethernet0
ipx network 4a
ipx access group 800 out

interface ethernetl
ipx network 3d

interface ethernet2
ipx network 5c

access list 800 permit 3d 4a
...
which two actions result from implementing this configuration? (Choose two)
B.Traffic from network 3d for network 4a will be forwarded out e0
E.The access list is applied to an outgoing interface and filters outbound
traffic

64.What are two purposes for segmenting a network with a bridge? (Choose two )
A.to reduce the number of collisions
c.to add collision domains

40.Which commands should you use to enable IGRP routing?
A. router igrp 100
Network 192.168.1.0
Network 10.0.0.0.
B. router igrp 100
Network 192.168.2.0
Network 10.0.0.0
Both are good. Maybe you mistyped something in one of these.

Cheers!


[This message has been edited by dmaftei (edited 12-18-2000).]

Report this post to a moderator

Hi all
This is my opinion. I would like to hear from others specifically Yankee & Deets

When we provide answer to this type of messages, I feel that there is more of disadvantages compared to advantages.

As an advantage it may help them to pass the exam and obtain the certification. On the other side of the coin it might be or mostly will be paper certificate. Most of the members who take advantage from this type of messages rarely learn the concepts. In one way we are blocking him learning the concepts, by helping him in passing the exam.

Note: Gavin please don't misunderstand me, nothing against you. I am seeing this type of message quite often and I don't feel comfortable.

The above said is my personnel opinion.

Bilal

Report this post to a moderator

dmaftei has allready given you er very good answer. I would just like to comment on one question.

quote:

---

Originally posted by gavin:
103.Which two commands show your access lists? (Choose two )
A.show filters
B.show access-lists
c.show ip access-lists
D.show running-config

---

Report this post to a moderator

Bilal,

I can understand your feeling !!once pass the exam think of yourself .....

However , you must be seeking assistance from all the sides for your CCNP prep.

Papercert. in cisco can not survive its my opinion , since cisco monopolosised itself

as MS adapts strategy to be monopolosised.

Report this post to a moderator