Are there any issues of haveing windows 2000 server sp3
and then applying sp3 for exchange?....or has it been a
pretty good update?

thanx

Jason

Report this post to a moderator

I'd recommend applying it.

--
Neil Hobson
Silversands

http://www.silversands.co.uk

"Jason" <flames@canada.com> wrote in message
news:02fd01c2a69d$356e90f0$89f
82ecf@TK2MSFTNGXA01...
> Are there any issues of haveing windows 2000 server sp3
> and then applying sp3 for exchange?....or has it been a
> pretty good update?
>
> thanx
>
> Jason

Report this post to a moderator

Whaty i meant is that i have sp3 for w2k and sp2 for
exchange. was the sp install alright or did anything get
wonky after the exchange sp update to bring them both to
sp3

Jason
>-----Original Message-----
>I'd recommend applying it.
>
>--
>Neil Hobson
>Silversands
>
>http://www.silversands.co.uk
>
>"Jason" <flames@canada.com> wrote in message
> news:02fd01c2a69d$356e90f0$89f
82ecf@TK2MSFTNGXA01...
>> Are there any issues of haveing windows 2000 server sp3
>> and then applying sp3 for exchange?....or has it been a
>> pretty good update?
>>
>> thanx
>>
>> Jason
>
>
>.
>

Report this post to a moderator

I've never had any issues when updating Exchange to SP3.

--
Neil Hobson
Silversands

http://www.silversands.co.uk

"jason" <flames@home.com> wrote in message
news:038c01c2a6b5$60a172c0$8ef
82ecf@TK2MSFTNGXA04...
> Whaty i meant is that i have sp3 for w2k and sp2 for
> exchange. was the sp install alright or did anything get
> wonky after the exchange sp update to bring them both to
> sp3
>
> Jason
> >-----Original Message-----
> >I'd recommend applying it.
> >
> >--
> >Neil Hobson
> >Silversands
> >
> >http://www.silversands.co.uk
> >
> >"Jason" <flames@canada.com> wrote in message
> > news:02fd01c2a69d$356e90f0$89f
82ecf@TK2MSFTNGXA01...
> >> Are there any issues of haveing windows 2000 server sp3
> >> and then applying sp3 for exchange?....or has it been a
> >> pretty good update?
> >>
> >> thanx
> >>
> >> Jason
> >
> >
> >.
> >

Report this post to a moderator

"Neil Hobson" <neilhobson@NOSPAM.supanet.com> wrote:

>I've never had any issues when updating Exchange to SP3.

And in either order. E2K SP2 -> W2K SP3 -> E2K SP3, or E2K SP3 -> W2K
SP3. Both worked just fine.

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm

Report this post to a moderator

I recommend you apply the Exchange SP3 also.

As if you upgrade the Exchange from Standard edition and
upgrade to Enterprise Edition. You may got unexpected
error.


>-----Original Message-----
>Whaty i meant is that i have sp3 for w2k and sp2 for
>exchange. was the sp install alright or did anything get
>wonky after the exchange sp update to bring them both to
>sp3
>
>Jason
>>-----Original Message-----
>>I'd recommend applying it.
>>
>>--
>>Neil Hobson
>>Silversands
>>
>>http://www.silversands.co.uk
>>
>>"Jason" <flames@canada.com> wrote in message
>> news:02fd01c2a69d$356e90f0$89f
82ecf@TK2MSFTNGXA01...
>>> Are there any issues of haveing windows 2000 server sp3
>>> and then applying sp3 for exchange?....or has it been a
>>> pretty good update?
>>>
>>> thanx
>>>
>>> Jason
>>
>>
>>.
>>
>.
>

Report this post to a moderator

Only problem I encountered is that it is not possible to create an OWA-site
with SSL after Sp3...
If the site is created before Sp3 there is no problem, but if you do it
afterwards the SSL-box is blanked out.
So if anyone knows what to do, post it here, otherwise if you want to use
SSL create it before...

Jimmy

"Rich Matheisen [MVP]" <richnews@rmcons.com.NOSPAM.COM> wrote in message
news:3oc20vkc0479avmgnlf8vkdi3
o0fs9o2b4@4ax.com...
> "Neil Hobson" <neilhobson@NOSPAM.supanet.com> wrote:
>
> >I've never had any issues when updating Exchange to SP3.
>
> And in either order. E2K SP2 -> W2K SP3 -> E2K SP3, or E2K SP3 -> W2K
> SP3. Both worked just fine.
>
> --
> Rich Matheisen
> MCSE+I, Exchange MVP
> MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm

Report this post to a moderator

If you remove the TCP port number the SSL port number field will enable.

"jiso" <jiso@trustit.nu> wrote in message
news:e3HM7m2pCHA.1664@TK2MSFTNGP10...
> Only problem I encountered is that it is not possible to create an
OWA-site
> with SSL after Sp3...
> If the site is created before Sp3 there is no problem, but if you do it
> afterwards the SSL-box is blanked out.
> So if anyone knows what to do, post it here, otherwise if you want to use
> SSL create it before...
>
> Jimmy
>
> "Rich Matheisen [MVP]" <richnews@rmcons.com.NOSPAM.COM> wrote in message
> news:3oc20vkc0479avmgnlf8vkdi3
o0fs9o2b4@4ax.com...
> > "Neil Hobson" <neilhobson@NOSPAM.supanet.com> wrote:
> >
> > >I've never had any issues when updating Exchange to SP3.
> >
> > And in either order. E2K SP2 -> W2K SP3 -> E2K SP3, or E2K SP3 -> W2K
> > SP3. Both worked just fine.
> >
> > --
> > Rich Matheisen
> > MCSE+I, Exchange MVP
> > MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm
>
>

Report this post to a moderator