lets say the pix is running PAT and I have 3 machines on the inside. One of which I want to have port 80 open to the outside and another I want smtp open to the outside.

Is there a way to config the pix so that when someone from the outside connects to that 1 global IP at port 25 it will go to that 1 server and when they connect to port 80 at the same IP it goes to the other?



Also so far (reading the cisco press Pix config book) I havent noticed anything to handle syn/fin/ack flood like in the IOS ip inspect commands. What handles this in the pix?


Also, I apologize if these questions are dumb I am still learning

Report this post to a moderator

1. pix is running PAT and I have 3 machines

port redirect

2. appedndix A

Last edited by mikop on 12-16-02 at 07:28 AM

Report this post to a moderator

link doesnt work


and chap 12(cisco secure pix firewalls) is covering the IOS CBAC (router). Not how to handle syn floods with pix.

Report this post to a moderator

remove %20 </br etc> from all malformed link.

http://www.cisco.com/en/US/products...ad.shtml#topic9

yes... forgot chapters are mixed... had to check if that was covered in the mcns box. appendix a of pix is correct is correct.

http://www.cisco.com/univercd/cc/td.../gl.htm#xtocid9

Report this post to a moderator

thanks

Report this post to a moderator