I have Win2k server sp2 w/Exchange2k, and I am getting the
following event in Event viewer when BackUp Exec attempts
to backup the information store:

Source: ESE98
EventID: 478

Information Store (3012) The streaming page read from the
file "d:\exchsrvr\MDBDATA\PRIV.stm" at offset 54513664
(0x00000000033fd000) for 2963 (0x00000b93) bytes failed
verification due to a page checksum mismatch. The
expected checksum was 3622484426 (0xd7eab9ca) and the
actual checksum was 2558780034 (0x9883e282). The read
operation will fail with error -613 (0xfffffd9b). If this
condition persists then please restore the database from a
previous backup.


I have run eseutil /p on the priv.stm file, but the log
showed no errors. Does anyone have any suggestions?
thanks

Report this post to a moderator

I had this problem right prior to loosing my STM file. Their is a command
switch for eseutil, I think its "/rebuildstm" that I had to issue to repair
the database and the file. I actually had to work with premier support to
get this done and it took a ton of time, even on a 4 processor machine.


"Steich" <paul_revere_@hotmail.com> wrote in message
news:2a4301c244a6$b138ba20$a5e
62ecf@tkmsftngxa07...
> I have Win2k server sp2 w/Exchange2k, and I am getting the
> following event in Event viewer when BackUp Exec attempts
> to backup the information store:
>
> Source: ESE98
> EventID: 478
>
> Information Store (3012) The streaming page read from the
> file "d:\exchsrvr\MDBDATA\PRIV.stm" at offset 54513664
> (0x00000000033fd000) for 2963 (0x00000b93) bytes failed
> verification due to a page checksum mismatch. The
> expected checksum was 3622484426 (0xd7eab9ca) and the
> actual checksum was 2558780034 (0x9883e282). The read
> operation will fail with error -613 (0xfffffd9b). If this
> condition persists then please restore the database from a
> previous backup.
>
>
> I have run eseutil /p on the priv.stm file, but the log
> showed no errors. Does anyone have any suggestions?
> thanks
>

Report this post to a moderator

"Scott Ramnitz" <scott.ramnitz@sbs.siemens.com> wrote:

>I had this problem right prior to loosing my STM file. Their is a command
>switch for eseutil, I think its "/rebuildstm"

Do you recall the exact set of command line information you used? I
know there's a "/createstm"

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm

Report this post to a moderator

I found the following link with all the eseutil
switches...I do not see a /rebuildstm. Do you know which
one should be used? thanks for your help

http://support.microsoft.com/default.aspx?scid=kb;EN-
US;q182903




>-----Original Message-----
>"Scott Ramnitz" <scott.ramnitz@sbs.siemens.com> wrote:
>
>>I had this problem right prior to loosing my STM file.
Their is a command
>>switch for eseutil, I think its "/rebuildstm"
>
>Do you recall the exact set of command line information
you used? I
>know there's a "/createstm"
>
>--
>Rich Matheisen
>MCSE+I, Exchange MVP
>MS Exchange FAQ at
http://www.swinc.com/resource/exch_faq.htm
>.
>

Report this post to a moderator

I found the following link with all the eseutil
switches...I do not see a /rebuildstm. Do you know which
one should be used? thanks for your help

http://support.microsoft.com/default.aspx?scid=kb;EN-
US;q182903



>-----Original Message-----
>Message unavailable

Report this post to a moderator

Steich,

I am having the same issue that you had a while back with the priv.stm and checksum error as you try to backup Exchange 2000 with backupexec. You keep on getting an access denied error. What did you do to fix it. Any answers would be appreciated.

Thanks,
Ed

Report this post to a moderator