which frame relay method show both source dlci and destination dlci?
1) show frame-relay pvc
2) show frame-relay route
3) show frame-relay map
4) debug frame-relay lmi

Report this post to a moderator

R10>sh frame route <---This one
Input Intf Input Dlci Output Intf Output Dlci Status
Serial0/0 150 Serial1/0 140 active
Serial0/1 160 Serial1/0 130 active
Serial1/0 130 Serial0/1 160 active
Serial1/0 140 Serial0/0 150 active
R10>

R10>sh frame pvc

PVC Statistics for interface Serial0/0 (Frame Relay DCE)

DLCI = 150, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0

input pkts 3304 output pkts 3294 in bytes 242996
out bytes 365938 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched 3303

pvc create time 1d07h, last time pvc status changed 1d07h

PVC Statistics for interface Serial0/1 (Frame Relay DCE)

DLCI = 160, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial0/1

input pkts 3299 output pkts 3284 in bytes 242936
out bytes 365318 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched 3298

pvc create time 1d07h, last time pvc status changed 1d07h

PVC Statistics for interface Serial1/0 (Frame Relay DCE)

DLCI = 130, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 3284 output pkts 3299 in bytes 365318
out bytes 242978 dropped pkts 1 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched 3284

pvc create time 1d07h, last time pvc status changed 1d07h

DLCI = 140, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

input pkts 3294 output pkts 3303 in bytes 365938
out bytes 242962 dropped pkts 1 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts Switched 3294

pvc create time 1d07h, last time pvc status changed 1d07h
R10>

R10>sh fram lmi

LMI Statistics for interface Serial0/0 (Frame Relay DCE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Rcvd 9167 Num Status msgs Sent 9167
Num Update Status Sent 0 Num St Enq. Timeouts 102

LMI Statistics for interface Serial0/1 (Frame Relay DCE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Rcvd 9126 Num Status msgs Sent 9126
Num Update Status Sent 0 Num St Enq. Timeouts 94

LMI Statistics for interface Serial1/0 (Frame Relay DCE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Rcvd 9223 Num Status msgs Sent 9223
Num Update Status Sent 0 Num St Enq. Timeouts 40
R10>

__________________
Yeti the Inquisitive

MCNE, MCSE(NT4), MCSE 2000, SCO ACE, LCP, Compaq ASE, CCNA, CCIE Wannabe (part of the Wannabe Boffin Club).

www.yeti-gbr1.co.uk
www.ciscolabs.co.uk

Report this post to a moderator

good work ! thanks

Report this post to a moderator

What does Sh Fram Map give ya??

DLCI to IP mappings?

Report this post to a moderator

Ablosutely zip all that's what Which is why I did not list it.

From my labs @ www.yeti-gbr1.co.uk Lab12

R1 gives this:

R1>sh fram map
Serial1 (up): ip 3.1.3.1 dlci 150(0x96,0x2460), dynamic,
broadcast,, status defined, active
R1>

R1>sh fram pvc

PVC Statistics for interface Serial1 (Frame Relay DTE)

Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 150, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1

input pkts 5289 output pkts 5305 in bytes 597358
out bytes 395118 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 5305 out bcast bytes 395118
pvc create time 1d16h, last time pvc status changed 1d16h
R1>

R1>sh fram lmi

LMI Statistics for interface Serial1 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 14706 Num Status msgs Rcvd 14707
Num Update Status Rcvd 0 Num Status Timeouts 0
R1>

__________________
Yeti the Inquisitive

MCNE, MCSE(NT4), MCSE 2000, SCO ACE, LCP, Compaq ASE, CCNA, CCIE Wannabe (part of the Wannabe Boffin Club).

www.yeti-gbr1.co.uk
www.ciscolabs.co.uk

Last edited by Yeti-GBR1 on 03-28-02 at 03:16 PM

Report this post to a moderator