Has anyone had problems with the new test interface working correctly?

I took the day off today and drove 2 hours to the nearest testing center that offers the 640-607 test. When I started the test, it errored out and quit working. Prometric blamed the problem on a faulty test driver. To make a long story short, I didn't get to take the test, so I have to go back Monday to try it again.

Just curious if anyone else had a similar experience.

Report this post to a moderator

Well I hope that you are not down. At least you still have the weekend to prepare a bit more.

Best of luck on monday.

__________________
Riding the endless light of fortunes...

http://www.darkroads.com

Report this post to a moderator

I know what you're talking about. Took the exam on Wednesday. The first few questions went fine, then the Router Sim began to load. The screen went blank for well over a minute and then when the Sim loaded it wouldn't function. I even enlisted the help of the Prometrics folks - they called the Prometric Help Desk. The Help Desk agent told the local folks shut down the PC, restart, run Scandisk and retart my test. It started on the next question, scoring a big 0 for the router sim question. I ended up failing the test by 40+ points. I left the test center with a Prometric Help Desk ticket number and a "Failed" stamp on my score report - what an experience. . . I'm waiting on Prometric and Cisco to see what there going to do about reimbursing me for a second test. I'm going to give it another shot on Monday. My advice - ask the Test Center to reboot the PC your going to be testing on. This exam software is taking a lot of PC resources. Oh, for those of you wondering, I did get the second sim question to work and it does accept shortcuts like "config t" and "en". Know your subnetting and access-list before going in - there are lots of questions about both.

Report this post to a moderator

It happened again today!!!!! I can't describe how mad that makes me!!! I have driven over 400 miles and taken 2 days off of work to take this test. Both times I haven't been able to take it because of a problem with the test driver. We called Prometric tech support, and the best they could offer was that they have a known issue with the test and it will be a few days before it will be available. What a jerk around.... You would think that if so many people are having problems with the new test, maybe they would extend the old test a few more weeks....

Report this post to a moderator

WOW! what a bummer

__________________
ON A JOURNEY THAT WILL NEVER END!!

SYRIEAN RAY

Report this post to a moderator

Holy smokes, I guess I'll wait before I take it.

ps. That's a bunch of #$%&* and I would not stand for it !! Get your money back and complain, complain, complain!

Report this post to a moderator

i did not have this problem, and wondering if the problem is with the systems that you are testing on not meeting the minimum requirements to give the exam ie incompatible video, or lack of ram.

/agree complain, complain, complain

Report this post to a moderator

hmmm nice beta period ...
looks like you guys are the alpha testers.

__________________
http://www.cisco.com/univercd/

Report this post to a moderator

This is a known issue with Prometric. As it turns out, they never beta tested the new exam format and it failed from their servers! I would suggest you test at VUE. They beta tested and it works. Besides, they are better to work with anyway! Prometric sucks.

Report this post to a moderator