Home > Archive > Hardware > February 2005 > Troubleshoot Faulty Network Adapter





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Troubleshoot Faulty Network Adapter
LIMMC123

2005-02-07, 3:06 am

Hi,

How to troubleshoot faulty network adapter?

Thanks in advance.

Rgds/mclilm
TheKnee

2005-02-09, 2:12 pm

Most network card come from manufacturer with a disk or cd rom with drivers and diagnostic for that card brand ,you could also use the windows utilities like ping and tracert good luck
ChrisDfer

2005-02-10, 8:34 am

Or swap in a known good(assuming it is not a configuration issue)
Rusty Tyson

2005-02-13, 12:23 pm

1. Look for "link lights" (continuity indicator lamp and activity indicator lamp, if present on the particular brand of nic you have - not all do)

2. Ascertain that you are using a known good patch cord.

3. I have downloaded the diagnostic utility(ies) with the drivers for some 3com cards.

What make and model NIC are you troubleshooting?

How do you know that it is faulty?

4. Check BIOS/setup to ascertain that the nic is turned "ON" if it's the onboard nic that's giving your problems; if it's not the onboard nic that's "faulty" make sure the onboard nic is set to "OFF" so your add/in network interface card is properly detected.

Please provide some more details (motherboard, os, VISA card number, etc.) to allow us to help you diagnose your "faulty network adapter".
rmarrero

2005-02-13, 8:19 pm

Also if you know how to create a loopback cable, it would be the best!
Rusty Tyson

2005-02-13, 8:54 pm

Please pardon me for jumping/into the thread initiated by LIMMC123 to pose my own response to rmarrero's submission.

The idea seems almost too simple for me to be asking this question, but here goes anyway:

Do you know of a link to an article (and would you share with us) that describes how to build one's own loopback? (Something like what MakeItSimple.com has to offer?) My own thought on the matter has been that if I would look at what the 568A and 568B pinouts are, then which wires I have to loopback to my RJ45 plug would be obvious. I just haven't gotten A Round Tuit. If somebody else has done it, then let's read and check their solution. If no one else has done it, then let us draft our own solution and see if'n we can get our hosts here to post our creation for us.

Thanks for entertaining my thought. I apologize for being so lazy that I just haven't yet done such a simple exercise.
jrhonomichl

2005-02-14, 11:44 am

This is a simple way to make an ethernet loopback plug

http://www.tikkiweb.net/tools/loopback.htmhttp://www.tikkiweb.net/tools/loopback.htm

This link makes a more robust cable http://www.ossmann.com/5-in-1.html
Sponsored Links





Free Braindumps | MCSE braindumps software forum

Copyright 2003 - 2008 examnotes.net