Cisco Security exams - what is the correct answer?

Author

what is the correct answer?

ikea

2003-12-11, 11:18 pm

QUESTION NO: 62
The hardware requirements of the Stateful Failover are: (Choose all that apply)

A. Two identical PIX Firewall units.
FIX 520 or later model is recommended by Cisco.
B. The LAN ports for Stateful Failover on both PIX Firewall units should be connected
with a crossover cable or through a hub or switch.
C. A failover cable with the correct terminals.
D. Dedicated 10BaseT Ethernet ports on both PIX Firewall units must be connected and
fully functional in full Duplex mode.

Steve Howe

2003-12-15, 9:03 am

For me

A is ambiguous, PIX 501 and 506 does not support failover

B/C are ok

D are not right (lan based failover):

from confguide6.3:
Ethernet connection (“LAN-based failover”)—You can use any unused Ethernet interface on the device. If the units are further than six feet apart, use this method. We recommend that you connect this link through a dedicated switch. You cannot use a crossover Ethernet cable to link the units
directly.

Hi!

Sponsored Links