|
Home > Archive > alt.certification.network-plus > June 2002 > Re: Q: Default Netware Frametype?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Re: Q: Default Netware Frametype?
|
|
| \\/\\/ildchild 2002-06-24, 6:44 pm |
| Intranetware loads only 802.3 by default...
If i am not mistaken - only been a few years since!
-WC
On Sat, 18 May 2002 16:24:59 -0400, "NETWERKZ"
<Netwerkz101@bellsouth.net> wrote:
>Netware 3.11 and lower defaulted to 802.3
>Netware 3.12 and higher defaulted to 802.2
>
>Is this correct?
>
>I thought it was..... "Network+ Guide to Networks" 2nd Edition by Tamara
>Dean says this is the case....
>
>a few checks on google says this is the case.....
>got a ? similar to following.
>-----------------------------------------------
>On Novell's Intranetware what is the default frametype used?
>
>A) Netware Propietary 802.3
>B) IEEE 802.3
>C) Ethernet II
>D) Ethernet SNAP
>
>
>so i was puzzled when i didn't see 802.2 as an answer ......
>ooooooo..... now that I am typing this ... a thought just entered the mind:
>
>does Intranetware load both 802.2 and 802.3 by default ????
>
>
>
| |
|
| http://support.novell.com/cgi-bin/s...gi?/2923008.htm
Technical Information Document=20
FAQ on intraNetWare for Small Business - TID2923008 (last modified =
15APR1998)=20
Q - What frame types are bound during install?
A - All. ETHERNET_802.3, ETHERNET_802.2, ETHERNET SNAP, ETHERNET II.
--------------------
Note Novell 802.2 & 802.3
are not
IEEE 802.2 & IEEE802.3
-------------
"\/\/ildchild" <wildchild@home.com> wrote in message =
news:5blogu0gaf3inqsppjfdn4jq8
t5kgff0lg@4ax.com...
> Intranetware loads only 802.3 by default...
>=20
> If i am not mistaken - only been a few years since!
>=20
> -WC
>=20
> On Sat, 18 May 2002 16:24:59 -0400, "NETWERKZ"
> <Netwerkz101@bellsouth.net> wrote:
>=20
> >Netware 3.11 and lower defaulted to 802.3
> >Netware 3.12 and higher defaulted to 802.2
> >
> >Is this correct?
> >
> >I thought it was..... "Network+ Guide to Networks" 2nd Edition by =
Tamara
> >Dean says this is the case....
> >
> >a few checks on google says this is the case.....
> >got a ? similar to following.
> >-----------------------------------------------
> >On Novell's Intranetware what is the default frametype used?
> >
> >A) Netware Propietary 802.3
> >B) IEEE 802.3
> >C) Ethernet II
> >D) Ethernet SNAP
> >
> >
> >so i was puzzled when i didn't see 802.2 as an answer ......
> >ooooooo..... now that I am typing this ... a thought just entered the =
mind:
> >
> >does Intranetware load both 802.2 and 802.3 by default ????
> >
> >
> >
>=20
|
|
|
|
|