|
Home > Archive > alt.certification.cisco > February 2004 > re PIX 506e
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Morpheous 2004-02-26, 11:25 pm |
| try adding a static route to the router. ALso the PIX will not alow any outside traffic to the inside network by design unless specificly allowed. Hope that helps.
| |
|
| Thanks for the reply. I thought it might be a routing problem. I did try
to add some route statements but I continually got the error message "route
already exists"
I think I may have had the statements the wrong way around.. I will be back
at it next week and try again. The inside of the PIX is the private address
10.7.1.0 and the other side of the ATM are 3 offices with 10.7.2, 10.7,3 and
10.7.5 addresses.
I have enabled RIP. RIP INSIDE PASSIVE
I have never worked with Cisco before, I guess that's obvious.
Thanks
"Morpheous" <m@matrix.com> wrote in message
news:R5z%b.68809$Ee6.46856@fe10.usenetserver.com...
> try adding a static route to the router. ALso the PIX will not alow any
outside traffic to the inside network by design unless specificly allowed.
Hope that helps.
>
|
|
|
|
|