|
Home > Archive > alt.certification.cisco > September 2003 > 2621 and DHCP assigned address
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
2621 and DHCP assigned address
|
|
| Chironex 2003-09-28, 9:25 pm |
| Hi all,
I have a 2621 that I bought for taking my CCNA. According to Cisco as of
IOS 12.1(2) there is the "ip address dhcp" command to allow the router to
connect to a cable modem.
I can not get this command to display using the following method:
conf t
int f0/0
ip address dhcp
Typing "ip address ?" reveals only 1 option to enter an IP manually.
The only thing I can think of is that it may not be available with the
current IOS I have:
IOS 12.1(21) IP/FW/IDS/IPSEC-3DES
Should I switch to IP PLUS/IPSEC 3DES? I absolutely need VPN capability to
access my home network, so I hope to god its not the IPSEC feature set!
thanks
M
| |
|
| It's not available until 12.1.2T. Check the command reference. If you have
a 2621 you should be running at least 12.2 code anyway.
"Chironex" <michael_XAEROSPAM_45@comcast.net> wrote in message
news:5rWcne4l0bBY4-qiU-KYjA@comcast.com...
> Hi all,
>
> I have a 2621 that I bought for taking my CCNA. According to Cisco as of
> IOS 12.1(2) there is the "ip address dhcp" command to allow the router to
> connect to a cable modem.
>
> I can not get this command to display using the following method:
>
> conf t
> int f0/0
> ip address dhcp
>
> Typing "ip address ?" reveals only 1 option to enter an IP manually.
>
> The only thing I can think of is that it may not be available with the
> current IOS I have:
> IOS 12.1(21) IP/FW/IDS/IPSEC-3DES
>
> Should I switch to IP PLUS/IPSEC 3DES? I absolutely need VPN capability
to
> access my home network, so I hope to god its not the IPSEC feature set!
>
> thanks
>
> M
>
>
| |
| Chironex 2003-09-29, 11:25 am |
| Thanks for this n00b. I got it to work fine on 12.1(2T) but I can't upgrade
to 12.2 due to memory restrictions (only 40/16 available and 48/16 required
for IPSEC).
I can only assume, however that 12.2 is more relevant to the cirriculum so I
will have to run the standard IP feature pack for this test.
M
"n00b" <n00b@n00b.com> wrote in message
news:c63892cd5132480e14eb6d44b
70f7edd@news.teranews.com...
> It's not available until 12.1.2T. Check the command reference. If you
have
> a 2621 you should be running at least 12.2 code anyway.
>
>
>
> "Chironex" <michael_XAEROSPAM_45@comcast.net> wrote in message
> news:5rWcne4l0bBY4-qiU-KYjA@comcast.com...
> > Hi all,
> >
> > I have a 2621 that I bought for taking my CCNA. According to Cisco as
of
> > IOS 12.1(2) there is the "ip address dhcp" command to allow the router
to
> > connect to a cable modem.
> >
> > I can not get this command to display using the following method:
> >
> > conf t
> > int f0/0
> > ip address dhcp
> >
> > Typing "ip address ?" reveals only 1 option to enter an IP manually.
> >
> > The only thing I can think of is that it may not be available with the
> > current IOS I have:
> > IOS 12.1(21) IP/FW/IDS/IPSEC-3DES
> >
> > Should I switch to IP PLUS/IPSEC 3DES? I absolutely need VPN capability
> to
> > access my home network, so I hope to god its not the IPSEC feature set!
> >
> > thanks
> >
> > M
> >
> >
>
>
|
|
|
|
|