|
Home > Archive > alt.certification.cisco > September 2003 > CCNA, HyperTerminal and Transcender 3.0 Question
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
CCNA, HyperTerminal and Transcender 3.0 Question
|
|
| Steve Scott 2003-09-24, 11:25 pm |
| Just completed the Thompson CCNA course and am now working on the
Transcender 3.0 prep.
A lab excercise on the Thompson course has you configure Windows
Hyperterminal to access the router console port (our labs use 2600
series routers). Recommended setup is:
Port = Com1
BPS = 9600
Data = 8
Stop = 1
Parity = None
Flow Control = Hardware
HyperTerminal sessions work just fine on the routers.
On the Transcender test, they ask the same question so I configured
the simulator with the above values and it was scored as "incorrect".
Their answer was Flow Control = None. I haven't tried to access the
router with the Transcender configuration.
Will both work? Why does Transcender score my solution wrong? Are
there more "gotchas" I need to be wary of on the Transcender?
| |
| Hansang Bae 2003-09-25, 1:25 am |
| In article < 6dm4nvkt9kmsagev3m37q1pj4hpktb
el75@4ax.com>, sscott2
@attb1.com says...
> Just completed the Thompson CCNA course and am now working on the
> Transcender 3.0 prep.
>
> A lab excercise on the Thompson course has you configure Windows
> Hyperterminal to access the router console port (our labs use 2600
> series routers). Recommended setup is:
>
> Port = Com1
> BPS = 9600
> Data = 8
> Stop = 1
> Parity = None
> Flow Control = Hardware
>
> HyperTerminal sessions work just fine on the routers.
>
> On the Transcender test, they ask the same question so I configured
> the simulator with the above values and it was scored as "incorrect".
> Their answer was Flow Control = None. I haven't tried to access the
> router with the Transcender configuration.
>
> Will both work? Why does Transcender score my solution wrong? Are
> there more "gotchas" I need to be wary of on the Transcender?
It should be 8/N/1 and No flow control. Console port lacks the lines to
to do hardware flow control.
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
******************************
******************************
********
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
******************************
******************************
********
|
|
|
|
|