|
Home > Archive > alt.certification.cisco > September 2003 > PIX 501 setup
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| I am very new to Cisco and Pix setup.
Using a 501 with the latest IOS version.
How do I set it up where a user on the internet can connect to a server
behind the firewall on port 3389 (Terminal Server)?
Assume the internal network is 192.168.0.x 255.255.255.0. Assume the server
running terminal services is 192.168.0.14.
Thanks
| |
| Brad Ellis 2003-09-23, 8:25 pm |
| ACL to allow the traffic, and then a static nat for the specific port.
(that's how I'd do it)
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
brad@eccie.com
www.ccbootcamp.com/quicklinks.html (Cisco Training)
www.routerie.com (Cisco R&S CCIE Discussion groups)
www.securityie.com (Cisco Security CCIE Discussion groups)
www.optsys.net (Cisco hardware)
Voice: 702-968-5100
FAX: 702-968-5104
"Todd" <tatung70@hotmail.com> wrote in message
news:vmvfgti3s39444@corp.supernews.com...
> I am very new to Cisco and Pix setup.
>
> Using a 501 with the latest IOS version.
>
> How do I set it up where a user on the internet can connect to a server
> behind the firewall on port 3389 (Terminal Server)?
>
> Assume the internal network is 192.168.0.x 255.255.255.0. Assume the
server
> running terminal services is 192.168.0.14.
>
> Thanks
>
>
| |
| Todd Hudson 2003-09-23, 10:25 pm |
| Thanks Brad, however as I indicated, I am very new and do not have a clue.
"Brad Ellis" <brad@nospam.com> wrote in message
news:vn1mdmpnlf3e2b@corp.supernews.com...
> ACL to allow the traffic, and then a static nat for the specific port.
> (that's how I'd do it)
>
> thanks,
> -Brad Ellis
> CCIE#5796 (R&S / Security)
> Network Learning Inc
> brad@eccie.com
> www.ccbootcamp.com/quicklinks.html (Cisco Training)
> www.routerie.com (Cisco R&S CCIE Discussion groups)
> www.securityie.com (Cisco Security CCIE Discussion groups)
> www.optsys.net (Cisco hardware)
> Voice: 702-968-5100
> FAX: 702-968-5104
> "Todd" <tatung70@hotmail.com> wrote in message
> news:vmvfgti3s39444@corp.supernews.com...
> > I am very new to Cisco and Pix setup.
> >
> > Using a 501 with the latest IOS version.
> >
> > How do I set it up where a user on the internet can connect to a server
> > behind the firewall on port 3389 (Terminal Server)?
> >
> > Assume the internal network is 192.168.0.x 255.255.255.0. Assume the
> server
> > running terminal services is 192.168.0.14.
> >
> > Thanks
> >
> >
>
>
| |
|
| Spend some time on www.cisco.com - There are numerous sample configs you
can use there to figure out what you need to get done.
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
brad@eccie.com
www.ccbootcamp.com/quicklinks.html (Cisco Training)
www.routerie.com (Cisco R&S CCIE Discussion groups)
www.securityie.com (Cisco Security CCIE Discussion groups)
www.optsys.net (Cisco hardware)
Voice: 702-968-5100
FAX: 702-968-5104
"Todd Hudson" <tatung70@hotmail.com> wrote in message
news:vn1vhlaiccs37d@corp.supernews.com...
> Thanks Brad, however as I indicated, I am very new and do not have a clue.
>
>
> "Brad Ellis" <brad@nospam.com> wrote in message
> news:vn1mdmpnlf3e2b@corp.supernews.com...
> > ACL to allow the traffic, and then a static nat for the specific port.
> > (that's how I'd do it)
> >
> > thanks,
> > -Brad Ellis
> > CCIE#5796 (R&S / Security)
> > Network Learning Inc
> > brad@eccie.com
> > www.ccbootcamp.com/quicklinks.html (Cisco Training)
> > www.routerie.com (Cisco R&S CCIE Discussion groups)
> > www.securityie.com (Cisco Security CCIE Discussion groups)
> > www.optsys.net (Cisco hardware)
> > Voice: 702-968-5100
> > FAX: 702-968-5104
> > "Todd" <tatung70@hotmail.com> wrote in message
> > news:vmvfgti3s39444@corp.supernews.com...
> > > I am very new to Cisco and Pix setup.
> > >
> > > Using a 501 with the latest IOS version.
> > >
> > > How do I set it up where a user on the internet can connect to a
server
> > > behind the firewall on port 3389 (Terminal Server)?
> > >
> > > Assume the internal network is 192.168.0.x 255.255.255.0. Assume the
> > server
> > > running terminal services is 192.168.0.14.
> > >
> > > Thanks
> > >
> > >
> >
> >
>
>
| |
| Todd Hudson 2003-09-24, 9:25 am |
| thanks but as stated, already done that.
I just wanted a couple lines of IOS but you can not help me. thanks.
"Brad" <brad@nospam.com> wrote in message
news:WA7cb.7385$gv5.6281@fed1read05...
> Spend some time on www.cisco.com - There are numerous sample configs you
> can use there to figure out what you need to get done.
>
> thanks,
> -Brad Ellis
> CCIE#5796 (R&S / Security)
> Network Learning Inc
> brad@eccie.com
> www.ccbootcamp.com/quicklinks.html (Cisco Training)
> www.routerie.com (Cisco R&S CCIE Discussion groups)
> www.securityie.com (Cisco Security CCIE Discussion groups)
> www.optsys.net (Cisco hardware)
> Voice: 702-968-5100
> FAX: 702-968-5104
>
> "Todd Hudson" <tatung70@hotmail.com> wrote in message
> news:vn1vhlaiccs37d@corp.supernews.com...
> > Thanks Brad, however as I indicated, I am very new and do not have a
clue.
> >
> >
> > "Brad Ellis" <brad@nospam.com> wrote in message
> > news:vn1mdmpnlf3e2b@corp.supernews.com...
> > > ACL to allow the traffic, and then a static nat for the specific port.
> > > (that's how I'd do it)
> > >
> > > thanks,
> > > -Brad Ellis
> > > CCIE#5796 (R&S / Security)
> > > Network Learning Inc
> > > brad@eccie.com
> > > www.ccbootcamp.com/quicklinks.html (Cisco Training)
> > > www.routerie.com (Cisco R&S CCIE Discussion groups)
> > > www.securityie.com (Cisco Security CCIE Discussion groups)
> > > www.optsys.net (Cisco hardware)
> > > Voice: 702-968-5100
> > > FAX: 702-968-5104
> > > "Todd" <tatung70@hotmail.com> wrote in message
> > > news:vmvfgti3s39444@corp.supernews.com...
> > > > I am very new to Cisco and Pix setup.
> > > >
> > > > Using a 501 with the latest IOS version.
> > > >
> > > > How do I set it up where a user on the internet can connect to a
> server
> > > > behind the firewall on port 3389 (Terminal Server)?
> > > >
> > > > Assume the internal network is 192.168.0.x 255.255.255.0. Assume the
> > > server
> > > > running terminal services is 192.168.0.14.
> > > >
> > > > Thanks
> > > >
> > > >
> > >
> > >
> >
> >
>
>
|
|
|
|
|