|
Home > Archive > alt.certification.cisco > September 2003 > Boson Router Sim help needed,...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Boson Router Sim help needed,...
|
|
|
| I am taking my CCNA in a few weeks, and thought I would brush up with
ts'g with the Boson v4.15 simulator today. After going crazy trying to
get a 5 router/2 pc config working (imported), I resorted to just two
routers with one serial connection. After show cdp neighbors didnt see
the neighboring router (note...these are working config files from the
schools lab), I noticed the .rtr files I imported were missing some
config lines. And mentally going back to class and realizing my new
configs had no clockrate set (though in my initial one it did), I
attempted to set it....what am I missing here? Output below...
Lab_A#config t
Lab_A(config)#int s 0
Lab_A(config-if)#no shutdown
Lab_A(config-if)#clock rate 56000
Lab_A(config-if)#
But when immediately check the running-config, nothing, no clockrate
shows its been set for s0. I saved the config, reloaded, same thing,
shows no clockrate for s0. Help.
Another quirky thing is that it has s0 set as
encapsulation frame-relay
when I go into s0, and give the command in config mode (for s0) of
no encapsulation frame-relay
it gives no errors, I save the config, reload, and sh run, and again,
it shows encapsulation frame-relay for s0.
What gives? (using v4.15 btw)
My initial config file for router #1 is below (but for some reasons
when either issueing, or manually placing into the .rtr files...any
'no' commands, they go unrecognized). Or maybe I am just learning
there is no substitute for the real thing! lol
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Lab_A
!
ip subnet-zero
!
interface Ethernet0
ip address 192.5.5.1 255.255.255.0
no ip directed-broadcast
no shutdown
!
interface Serial0
ip address 201.100.11.1 255.255.255.0
no ip directed-broadcast
no ip mroute-cache
no encapsulation frame-relay
no encapsulation ppp
clockrate 56000
no shutdown
!
interface Serial1
no ip address
no ip directed-broadcast
no encapsulation frame-relay
no encapsulation ppp
shutdown
!
router rip
network 192.5.5.0
network 201.100.11.0
!
ip classless
!
!
line con 0
password cisco
login
transport input none
line aux 0
line vty 0 4
password cisco
login
!
end
Glad I started sooner rather than later.....
Anyone who can give me a few hints or exchange some emails with me to
get the Boson sim up, I would really appreciate. If you email me
wanting a copy of the Boson sim, kick rocks.
Thanks!
I can be reached here or ciscovegas1@hotmail.com.
|
|
|
|
|