|
Home > Archive > alt.certification.cisco > August 2003 > Re: CCNA - two questions (Vlan and routing updates)
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Re: CCNA - two questions (Vlan and routing updates)
|
|
|
| Edin
Looks like both graphics are the same--they're both for the second question.
Your bold answers aren't showing up so I don't know what your answers were.
I'd be interested to see the graphic for question 1 so I can take a stab at
it. In the second question, I came up with:
1. config e1 w/address in the 172.30.10 net
4. Connect the router's E1 port to a switch port configured for VLAN 30
6. Add the network 172.30.10.0 to the dynamic routing protocol process.
Is this how you saw it?
T
"Edin Smajic" <edin10@iprimus.com.au> wrote in message
news:3f4e866f_1@news.iprimus.com.au...
> Hi
>
> I found those two questions (CCNA), and I answered them (see bold),
> but is it correct?
> If not could you tell me why?
> In the first question I know that rip, and igrp support triggered
> updates, but I think they questioned knowledge of (rip=30s), (igrp=90s),
> default routing updates intervals.
> In second question I think my answers are ok.
>
> Thanks very much for your help.
>
> Edin
>
> First see attachment 001.jpg
>
> A dynamic routing protocol is configured and working on all of the
> routers shown in the network. The new network, 143.116.123.0/24, was added
> to the configuration of Router E and advertised in its routing table 60
> seconds ago. Which of the following statements are true regarding the new
> network? (Choose three.)
>
> 1 If RIP is the routing protocol, routers A,B,C,D, and E should
display
> the new network in their routing table.
>
> 2 If RIP is the routing protocol, all of the routers should display the
> new network in their routing table.
>
> 3 If IGRP is the routing protocol, routers A,B,C,D, and E should display
> the new network in their routing table.
>
> 4 If IGRP is the routing protocol, only router E should display the new
> network in its routing table.
>
> 5 If OSPF is the routing protocol, routers B,C, and E should display the
> new network in their routing table.
>
> 6 If OSPF is the routing protocol, all of the routers should display the
> new network in their routing table.
>
>
>
>
> Please see attachment 002.jpg
>
> A company has outgrown the address space provided by its
192.168.10.0
> network. To accommodate new users, the network administrator decided to
> implement VLANs and do the following:
>
> 1. Place the users of the 192.168.10.0 network in VLAN 168.
> 2. Assign new users an IP address from the 172.30.10.0/24 network.
> 3. Place users of the 172.30.10.0 network in VLAN 30.
>
> After implementing the planned VLANs and connecting the network as
> shown in the graphic, the administrator finds that the users in VLAN 30
are
> unable to access the Internet or communicate with users in VLAN 168.
> However, VLAN 168 users are able to access the Internet and each other.
>
> Using the graphic, what should be done to enable users in VLAN 30 to
> communicate with VLAN 168 users and the Internet? (Choose three.)
>
>
> 1 Configure E1 with an address in the 172.30.10.0/24 network.
>
>
> 2 Place all VLAN 30 hosts on the same switch.
>
>
> 3 Configure all hosts with 192.168.10.1 as the default gateway.
>
>
> 4 Connect the router's E1 port to a switch port configured for VLAN
30.
>
>
> 5 Connect the router's E1 port to a switch port configured for VLAN
168.
>
>
> 6 Add the network 172.30.10.0 to the dynamic routing protocol process.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.514 / Virus Database: 312 - Release Date: 8/28/2003
| |
| FireSword 2003-08-28, 11:25 pm |
| If I remember the topology correctly, the answers for the first questions
are: 1, 4, 6
Answers to the second are: 1, 4, 6
And BTW, neither RIP or IGRP support triggered updates, only OSPF which is
why all routers would know about the new network in a few seconds.
RIP and IGRP do only periodic updates.
J.Rivera, CCNA, Network+, A+
"Edin Smajic" <edin10@iprimus.com.au> wrote in message
news:3f4e866f_1@news.iprimus.com.au...
> Hi
>
> I found those two questions (CCNA), and I answered them (see bold),
> but is it correct?
> If not could you tell me why?
> In the first question I know that rip, and igrp support triggered
> updates, but I think they questioned knowledge of (rip=30s), (igrp=90s),
> default routing updates intervals.
> In second question I think my answers are ok.
>
> Thanks very much for your help.
>
> Edin
>
> First see attachment 001.jpg
>
> A dynamic routing protocol is configured and working on all of the
> routers shown in the network. The new network, 143.116.123.0/24, was added
> to the configuration of Router E and advertised in its routing table 60
> seconds ago. Which of the following statements are true regarding the new
> network? (Choose three.)
>
> 1 If RIP is the routing protocol, routers A,B,C,D, and E should
display
> the new network in their routing table.
>
> 2 If RIP is the routing protocol, all of the routers should display the
> new network in their routing table.
>
> 3 If IGRP is the routing protocol, routers A,B,C,D, and E should display
> the new network in their routing table.
>
> 4 If IGRP is the routing protocol, only router E should display the new
> network in its routing table.
>
> 5 If OSPF is the routing protocol, routers B,C, and E should display the
> new network in their routing table.
>
> 6 If OSPF is the routing protocol, all of the routers should display the
> new network in their routing table.
>
>
>
>
> Please see attachment 002.jpg
>
> A company has outgrown the address space provided by its
192.168.10.0
> network. To accommodate new users, the network administrator decided to
> implement VLANs and do the following:
>
> 1. Place the users of the 192.168.10.0 network in VLAN 168.
> 2. Assign new users an IP address from the 172.30.10.0/24 network.
> 3. Place users of the 172.30.10.0 network in VLAN 30.
>
> After implementing the planned VLANs and connecting the network as
> shown in the graphic, the administrator finds that the users in VLAN 30
are
> unable to access the Internet or communicate with users in VLAN 168.
> However, VLAN 168 users are able to access the Internet and each other.
>
> Using the graphic, what should be done to enable users in VLAN 30 to
> communicate with VLAN 168 users and the Internet? (Choose three.)
>
>
> 1 Configure E1 with an address in the 172.30.10.0/24 network.
>
>
> 2 Place all VLAN 30 hosts on the same switch.
>
>
> 3 Configure all hosts with 192.168.10.1 as the default gateway.
>
>
> 4 Connect the router's E1 port to a switch port configured for VLAN
30.
>
>
> 5 Connect the router's E1 port to a switch port configured for VLAN
168.
>
>
> 6 Add the network 172.30.10.0 to the dynamic routing protocol process.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
| |
| Richard Deal 2003-08-29, 12:24 am |
| IGRP DOES support triggered updates--it's one advantage that it has over
RIP. Of course, the downside is that a flapping route in IGRP can cause a
lot of havoc.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of CCNA Cisco Certified Network Associate Study Guide (Exam 640-801),
Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access Exam Prep,
CCNP Switching Exam Cram, and CCNP Cisco LAN Switch Configuration Exam Cram
Cisco Test Prep author for QuizWare, providing the most comprehensive Cisco
exams on the market.
"FireSword" <joxel-spamguard-@hotmail.com> wrote in message
news:bZy3b.3232$xD2.2506@fe01.atl2.webusenet.com...
> If I remember the topology correctly, the answers for the first questions
> are: 1, 4, 6
> Answers to the second are: 1, 4, 6
>
> And BTW, neither RIP or IGRP support triggered updates, only OSPF which is
> why all routers would know about the new network in a few seconds.
> RIP and IGRP do only periodic updates.
>
> J.Rivera, CCNA, Network+, A+
>
> "Edin Smajic" <edin10@iprimus.com.au> wrote in message
> news:3f4e866f_1@news.iprimus.com.au...
> > Hi
> >
> > I found those two questions (CCNA), and I answered them (see
bold),
> > but is it correct?
> > If not could you tell me why?
> > In the first question I know that rip, and igrp support triggered
> > updates, but I think they questioned knowledge of (rip=30s),
(igrp=90s),
> > default routing updates intervals.
> > In second question I think my answers are ok.
> >
> > Thanks very much for your help.
> >
> > Edin
> >
> > First see attachment 001.jpg
> >
> > A dynamic routing protocol is configured and working on all of the
> > routers shown in the network. The new network, 143.116.123.0/24, was
added
> > to the configuration of Router E and advertised in its routing table 60
> > seconds ago. Which of the following statements are true regarding the
new
> > network? (Choose three.)
> >
> > 1 If RIP is the routing protocol, routers A,B,C,D, and E should
> display
> > the new network in their routing table.
> >
> > 2 If RIP is the routing protocol, all of the routers should display
the
> > new network in their routing table.
> >
> > 3 If IGRP is the routing protocol, routers A,B,C,D, and E should
display
> > the new network in their routing table.
> >
> > 4 If IGRP is the routing protocol, only router E should display the new
> > network in its routing table.
> >
> > 5 If OSPF is the routing protocol, routers B,C, and E should display the
> > new network in their routing table.
> >
> > 6 If OSPF is the routing protocol, all of the routers should display the
> > new network in their routing table.
> >
> >
> >
> >
> > Please see attachment 002.jpg
> >
> > A company has outgrown the address space provided by its
> 192.168.10.0
> > network. To accommodate new users, the network administrator decided to
> > implement VLANs and do the following:
> >
> > 1. Place the users of the 192.168.10.0 network in VLAN 168.
> > 2. Assign new users an IP address from the 172.30.10.0/24 network.
> > 3. Place users of the 172.30.10.0 network in VLAN 30.
> >
> > After implementing the planned VLANs and connecting the network as
> > shown in the graphic, the administrator finds that the users in VLAN 30
> are
> > unable to access the Internet or communicate with users in VLAN 168.
> > However, VLAN 168 users are able to access the Internet and each other.
> >
> > Using the graphic, what should be done to enable users in VLAN 30
to
> > communicate with VLAN 168 users and the Internet? (Choose three.)
> >
> >
> > 1 Configure E1 with an address in the 172.30.10.0/24 network.
> >
> >
> > 2 Place all VLAN 30 hosts on the same switch.
> >
> >
> > 3 Configure all hosts with 192.168.10.1 as the default gateway.
> >
> >
> > 4 Connect the router's E1 port to a switch port configured for VLAN
> 30.
> >
> >
> > 5 Connect the router's E1 port to a switch port configured for VLAN
> 168.
> >
> >
> > 6 Add the network 172.30.10.0 to the dynamic routing protocol
process.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
| |
| Richard Deal 2003-08-29, 7:32 pm |
| Edin,
RIPv1 doesn't, but RIPv2 does. Hope that helps
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of CCNA Cisco Certified Network Associate Study Guide (Exam 640-801),
Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access Exam Prep,
CCNP Switching Exam Cram, and CCNP Cisco LAN Switch Configuration Exam Cram
Cisco Test Prep author for QuizWare, providing the most comprehensive Cisco
exams on the market.
"Edin Smajic" <edin10@iprimus.com.au> wrote in message
news:3f4ed916_1@news.iprimus.com.au...
> Hi, and thanks for your replays
> I am sending the image for the first question again and by the way I have
> information from the book CCNA Exam 640-607 , page 463 that rip1 and igrp
> BOTH support flash (triggered) updates, so really I don't know what to
take
> for real.
>
> Best regards,
>
> Edin
>
>
> "FireSword" <joxel-spamguard-@hotmail.com> wrote in message
> news:bZy3b.3232$xD2.2506@fe01.atl2.webusenet.com...
> > If I remember the topology correctly, the answers for the first
questions
> > are: 1, 4, 6
> > Answers to the second are: 1, 4, 6
> >
> > And BTW, neither RIP or IGRP support triggered updates, only OSPF which
is
> > why all routers would know about the new network in a few seconds.
> > RIP and IGRP do only periodic updates.
> >
> > J.Rivera, CCNA, Network+, A+
> >
> > "Edin Smajic" <edin10@iprimus.com.au> wrote in message
> > news:3f4e866f_1@news.iprimus.com.au...
> > > Hi
> > >
> > > I found those two questions (CCNA), and I answered them (see
> bold),
> > > but is it correct?
> > > If not could you tell me why?
> > > In the first question I know that rip, and igrp support
triggered
> > > updates, but I think they questioned knowledge of (rip=30s),
> (igrp=90s),[color
=darkred]
> > > default routing updates intervals.
> > > In second question I think my answers are ok.
> > >
> > > Thanks very much for your help.
> > >
> > > Edin
> > >
> > > First see attachment 001.jpg
> > >
> > > A dynamic routing protocol is configured and working on all of[/color]
the[c
olor=darkred]
> > > routers shown in the network. The new network, 143.116.123.0/24, was
> added
> > > to the configuration of Router E and advertised in its routing table[/color]
60[co
lor=darkred]
> > > seconds ago. Which of the following statements are true regarding the
> new
> > > network? (Choose three.)
> > >
> > > 1 If RIP is the routing protocol, routers A,B,C,D, and E should
> > display
> > > the new network in their routing table.
> > >
> > > 2 If RIP is the routing protocol, all of the routers should display
> the
> > > new network in their routing table.
> > >
> > > 3 If IGRP is the routing protocol, routers A,B,C,D, and E should
> display
> > > the new network in their routing table.
> > >
> > > 4 If IGRP is the routing protocol, only router E should display the[/color]
new[c
olor=darkred]
> > > network in its routing table.
> > >
> > > 5 If OSPF is the routing protocol, routers B,C, and E should display[/color]
the[c
olor=darkred]
> > > new network in their routing table.
> > >
> > > 6 If OSPF is the routing protocol, all of the routers should display[/color]
the[c
olor=darkred]
> > > new network in their routing table.
> > >
> > >
> > >
> > >
> > > Please see attachment 002.jpg
> > >
> > > A company has outgrown the address space provided by its
> > 192.168.10.0
> > > network. To accommodate new users, the network administrator decided[/color]
to[co
lor=darkred]
> > > implement VLANs and do the following:
> > >
> > > 1. Place the users of the 192.168.10.0 network in VLAN 168.
> > > 2. Assign new users an IP address from the 172.30.10.0/24[/color]
network. [colo
r=darkred]
> > > 3. Place users of the 172.30.10.0 network in VLAN 30.
> > >
> > > After implementing the planned VLANs and connecting the network[/color]
as[co
lor=darkred]
> > > shown in the graphic, the administrator finds that the users in VLAN[/color]
30
> > are
> > > unable to access the Internet or communicate with users in VLAN 168.
> > > However, VLAN 168 users are able to access the Internet and each
other. [colo
r=darkred]
> > >
> > > Using the graphic, what should be done to enable users in VLAN[/color]
30
> to
> > > communicate with VLAN 168 users and the Internet? (Choose three.)
> > >
> > >
> > > 1 Configure E1 with an address in the 172.30.10.0/24 network.
> > >
> > >
> > > 2 Place all VLAN 30 hosts on the same switch.
> > >
> > >
> > > 3 Configure all hosts with 192.168.10.1 as the default gateway.
> > >
> > >
> > > 4 Connect the router's E1 port to a switch port configured for
VLAN
> > 30.
> > >
> > >
> > > 5 Connect the router's E1 port to a switch port configured for
VLAN
> > 168.
> > >
> > >
> > > 6 Add the network 172.30.10.0 to the dynamic routing protocol
> process.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
|
|
|
|
|