|
Home > Archive > alt.certification.cisco > August 2003 > CCIE R&S Recommended equipment list
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
CCIE R&S Recommended equipment list
|
|
| Brian Lehigh 2003-08-27, 2:24 pm |
| All,
I know I have seen this question posted in the past but it appears to have
been purged from my news server. Anyway, I am going to begin working
towards CCIE R&S. I currently hold both a CCNP and a CCDP so I guess this
is the next logical step. 
I would like to find out what you would recommended for an equipment list.
I currently have, in my possession, the following:
4 x 2514's
1 x 2511
1 x 7206 (no cards)
2 x 1601's (no cards)
1 x 1720 (no cards)
1 c CAT3548 switch
How much of the above equipment could be put to use in the practice labs?
What equipment should I add? Any PA's or WIC's that you would recommend for
the above routers?
Thanks again,
-Brian
| |
| Marcin Strzyzewski 2003-08-28, 5:25 am |
| Brian Lehigh wrote:
> All,
> I know I have seen this question posted in the past but it appears to have
> been purged from my news server. Anyway, I am going to begin working
> towards CCIE R&S. I currently hold both a CCNP and a CCDP so I guess this
> is the next logical step.
> I would like to find out what you would recommended for an equipment list.
> I currently have, in my possession, the following:
> 4 x 2514's
> 1 x 2511
> 1 x 7206 (no cards)
> 2 x 1601's (no cards)
> 1 x 1720 (no cards)
> 1 c CAT3548 switch
>
> How much of the above equipment could be put to use in the practice labs?
> What equipment should I add? Any PA's or WIC's that you would recommend for
> the above routers?
well 1st: RAM/FLASH 16/16 for 25xx
you will need one router to perform as FR switch - min. 4 serials,
so i would sell 7206 and bought 2522 as FR switch.
also I would sell 1600 and buy 2503 ( to test ISDN )
thats my 0.02 cent
if you have more q's mail me
--
Marcin Tadeusz Strzyzewski
CCNP/CCSP/SCSA
| |
|
| I agree with Marcin, and I would also sell the 3548 and get a 3550 instead.
Pick up an ISDN simulator, too (and I just so happen to be able to recommend
a great place. www.cheapisdn.com
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
brad@eccie.com
"Marcin Strzyzewski" <mstrzyze@tele.pw.edu.pl> wrote in message
news:bikgq0$qp6$1@inews.gazeta.pl...
> Brian Lehigh wrote:
> > All,
> > I know I have seen this question posted in the past but it appears to
have
> > been purged from my news server. Anyway, I am going to begin working
> > towards CCIE R&S. I currently hold both a CCNP and a CCDP so I guess
this
> > is the next logical step.
> > I would like to find out what you would recommended for an equipment
list.
> > I currently have, in my possession, the following:
> > 4 x 2514's
> > 1 x 2511
> > 1 x 7206 (no cards)
> > 2 x 1601's (no cards)
> > 1 x 1720 (no cards)
> > 1 c CAT3548 switch
> >
> > How much of the above equipment could be put to use in the practice
labs?
> > What equipment should I add? Any PA's or WIC's that you would recommend
for
> > the above routers?
>
> well 1st: RAM/FLASH 16/16 for 25xx
> you will need one router to perform as FR switch - min. 4 serials,
> so i would sell 7206 and bought 2522 as FR switch.
> also I would sell 1600 and buy 2503 ( to test ISDN )
> thats my 0.02 cent
> if you have more q's mail me
>
>
> --
> Marcin Tadeusz Strzyzewski
> CCNP/CCSP/SCSA
>
| |
| TheRealSlimShady 2003-08-31, 7:26 am |
| I'd also agree with that. However, you can get by without a router
dedicated to the frame relay switch function. All I did here was to set one
end up with the "frame relay switching" command and then set the interface
to be frame relay dce. Worked okay for me.
You definitely need to get hold of a pair of 3550's.
Slim
"Brad" <brad@nospam.com> wrote in message
news:zNs3b.7433$n94.6357@fed1read04...
> I agree with Marcin, and I would also sell the 3548 and get a 3550
instead.
>
> Pick up an ISDN simulator, too (and I just so happen to be able to
recommend
> a great place. www.cheapisdn.com
>
> thanks,
> -Brad Ellis
> CCIE#5796 (R&S / Security)
> Network Learning Inc
> brad@eccie.com
>
> "Marcin Strzyzewski" <mstrzyze@tele.pw.edu.pl> wrote in message
> news:bikgq0$qp6$1@inews.gazeta.pl...
> > Brian Lehigh wrote:
> > > All,
> > > I know I have seen this question posted in the past but it appears to
> have
> > > been purged from my news server. Anyway, I am going to begin working
> > > towards CCIE R&S. I currently hold both a CCNP and a CCDP so I guess
> this
> > > is the next logical step.
> > > I would like to find out what you would recommended for an equipment
> list.
> > > I currently have, in my possession, the following:
> > > 4 x 2514's
> > > 1 x 2511
> > > 1 x 7206 (no cards)
> > > 2 x 1601's (no cards)
> > > 1 x 1720 (no cards)
> > > 1 c CAT3548 switch
> > >
> > > How much of the above equipment could be put to use in the practice
> labs?
> > > What equipment should I add? Any PA's or WIC's that you would
recommend
> for
> > > the above routers?
> >
> > well 1st: RAM/FLASH 16/16 for 25xx
> > you will need one router to perform as FR switch - min. 4 serials,
> > so i would sell 7206 and bought 2522 as FR switch.
> > also I would sell 1600 and buy 2503 ( to test ISDN )
> > thats my 0.02 cent
> > if you have more q's mail me
> >
> >
> > --
> > Marcin Tadeusz Strzyzewski
> > CCNP/CCSP/SCSA
> >
>
>
|
|
|
|
|