|
Home > Archive > alt.certification.cisco > August 2003 > Router problem. Can anyone help please?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Router problem. Can anyone help please?
|
|
| ultraflt@earthlink.net 2003-08-13, 5:25 pm |
| Hi all
I am sure this one has been ask before but here goes. I have a Cisco
2501 router in-which I have installed new boot roms and flash memory.
When I connect to it using HyperTerminal all I get is little spades
and " " " " in the HyperTerminal window. Can anyone tell me what is
going on and how to fix it or direct me to a helpful website?
Thanks all.
| |
| Bekim Abazoski 2003-08-13, 8:24 pm |
| Are your baud rates set properly I believe default is 9600 Bps
<ultraflt@earthlink.net> wrote in message
news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
> Hi all
> I am sure this one has been ask before but here goes. I have a Cisco
> 2501 router in-which I have installed new boot roms and flash memory.
> When I connect to it using HyperTerminal all I get is little spades
> and " " " " in the HyperTerminal window. Can anyone tell me what is
> going on and how to fix it or direct me to a helpful website?
> Thanks all.
>
| |
| DullRazor 2003-08-13, 10:24 pm |
| Yes, I have HyperTerminal set to 9600 baud, 8-n-1 with no flow
control. Should I be using Hardware flow control? I am wanting to
upgrade the IOS on this machine.
On Thu, 14 Aug 2003 00:02:13 GMT, "Bekim Abazoski"
<bekim321@verizon.net> wrote:
>Are your baud rates set properly I believe default is 9600 Bps
><ultraflt@earthlink.net> wrote in message
> news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
>> Hi all
>> I am sure this one has been ask before but here goes. I have a Cisco
>> 2501 router in-which I have installed new boot roms and flash memory.
>> When I connect to it using HyperTerminal all I get is little spades
>> and " " " " in the HyperTerminal window. Can anyone tell me what is
>> going on and how to fix it or direct me to a helpful website?
>> Thanks all.
>>
>
| |
| Bekim Abazoski 2003-08-13, 10:24 pm |
| I believe it should be either Hardware flow control or none but it depends
on your PC, also verify that your PC com port operates fine. Along with
checking the com ports check the console cable.
"DullRazor" <ultraflt@earthlink.net> wrote in message
news:0f5mjv0v7iuli96si4dkhg1gm
jq6jp2vkm@4ax.com...
> Yes, I have HyperTerminal set to 9600 baud, 8-n-1 with no flow
> control. Should I be using Hardware flow control? I am wanting to
> upgrade the IOS on this machine.
>
> On Thu, 14 Aug 2003 00:02:13 GMT, "Bekim Abazoski"
> <bekim321@verizon.net> wrote:
>
> >Are your baud rates set properly I believe default is 9600 Bps
> ><ultraflt@earthlink.net> wrote in message
> > news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
> >> Hi all
> >> I am sure this one has been ask before but here goes. I have a Cisco
> >> 2501 router in-which I have installed new boot roms and flash memory.
> >> When I connect to it using HyperTerminal all I get is little spades
> >> and " " " " in the HyperTerminal window. Can anyone tell me what is
> >> going on and how to fix it or direct me to a helpful website?
> >> Thanks all.
> >>
> >
>
| |
|
| <ultraflt@earthlink.net> wrote in message
news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
> Hi all
> I am sure this one has been ask before but here goes. I have a Cisco
> 2501 router in-which I have installed new boot roms and flash memory.
> When I connect to it using HyperTerminal all I get is little spades
> and " " " " in the HyperTerminal window. Can anyone tell me what is
> going on and how to fix it or direct me to a helpful website?
> Thanks all.
>
Are you sure you got the boot roms in the right sockets? If I remember right
there are 2 and they are different. I think they're marked 1 and 2.
Just a thought.
--
tmack
| |
| DullRazor 2003-08-14, 9:24 am |
| I think I have the boot roms set right. First, their brand new and
have the boot instructions for the Cisco 2501 router but I get nothing
on the Hyperterminal screen but garbage. The operation system on my PC
is Windows 2000Pro and I use the Hypterminal program that came with
it. Should I not get a mini IOS that would allow me to configure the
router?
On Thu, 14 Aug 2003 07:30:01 GMT, "Tom" <tmack@yahoo.com> wrote:
><ultraflt@earthlink.net> wrote in message
> news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
>> Hi all
>> I am sure this one has been ask before but here goes. I have a Cisco
>> 2501 router in-which I have installed new boot roms and flash memory.
>> When I connect to it using HyperTerminal all I get is little spades
>> and " " " " in the HyperTerminal window. Can anyone tell me what is
>> going on and how to fix it or direct me to a helpful website?
>> Thanks all.
>>
>
>Are you sure you got the boot roms in the right sockets? If I remember right
>there are 2 and they are different. I think they're marked 1 and 2.
>Just a thought.
| |
| Erich Trowbridge 2003-08-14, 10:25 am |
| Make sure you are using a rolled cable - Pin1-> Pin8 , Pin2->Pin7, etc.
This sounds like a hardware garage thing. Also, make sure you are using
the DB9->RJ48 adaptor that came from Cisco. The flowcontrol on your PC
should be <none>. The console ports on Cisco routers do not supply any
flowcontrol under any circumstances.
Hope this helps,
Erich Trowbridge
CCIE 4653
On Thu, 14 Aug 2003 01:38:58 +0000, Bekim Abazoski wrote:
> I believe it should be either Hardware flow control or none but it depends
> on your PC, also verify that your PC com port operates fine. Along with
> checking the com ports check the console cable.
> "DullRazor" <ultraflt@earthlink.net> wrote in message
> news:0f5mjv0v7iuli96si4dkhg1gm
jq6jp2vkm@4ax.com...
>> Yes, I have HyperTerminal set to 9600 baud, 8-n-1 with no flow
>> control. Should I be using Hardware flow control? I am wanting to
>> upgrade the IOS on this machine.
>>
>> On Thu, 14 Aug 2003 00:02:13 GMT, "Bekim Abazoski"
>> <bekim321@verizon.net> wrote:
>>
>> >Are your baud rates set properly I believe default is 9600 Bps
>> ><ultraflt@earthlink.net> wrote in message
>> > news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
>> >> Hi all
>> >> I am sure this one has been ask before but here goes. I have a Cisco
>> >> 2501 router in-which I have installed new boot roms and flash memory.
>> >> When I connect to it using HyperTerminal all I get is little spades
>> >> and " " " " in the HyperTerminal window. Can anyone tell me what is
>> >> going on and how to fix it or direct me to a helpful website?
>> >> Thanks all.
>> >>
>> >
>>
| |
| Chris Davies 2003-08-14, 11:25 am |
| I would suggest that you put the original parts back in and try the
router again.
then you could perhaps try them in one at a time.
I hope this is of some help to you.
On Thu, 14 Aug 2003 12:34:46 GMT, DullRazor <ultraflt@earthlink.net>
wrote:
Drop the ZZZ to reply
Cheers ...
| |
| DullRazor 2003-08-14, 7:24 pm |
| Ok, here is the latest on this damned hosed router. I reinstalled the
flash and boot roms that came with it and I still get garbage in
HyperTerminal. Sometimes when I turn it on I get nothing at all other
times its garbage. I tried different jumper settings and made extra
certain the boot roms are in the right positions. Still, I get little
spades, small black squares and other garbage. I have another router,
2507, and I have no problems with it using the same console cable so I
know it isn't the cable. I am beginning to thing it is either bad ram
memory or something serious with the motherboard. Any other ideas
guys????
On Wed, 13 Aug 2003 21:00:24 GMT, ultraflt@earthlink.net wrote:
>Hi all
>I am sure this one has been ask before but here goes. I have a Cisco
>2501 router in-which I have installed new boot roms and flash memory.
>When I connect to it using HyperTerminal all I get is little spades
>and " " " " in the HyperTerminal window. Can anyone tell me what is
>going on and how to fix it or direct me to a helpful website?
>Thanks all.
| |
| FireSword 2003-08-27, 11:25 pm |
| well, the baud rate of the Console port can be configured using the
config-register.
so, I would try to connect to the console using all available rates. if it
connects at any other speed you can set the config-register to 2102 and it
will be back at 9600.
<ultraflt@earthlink.net> wrote in message
news:holljvsne76vo9nuhd6st4n4k
dft939erd@4ax.com...
> Hi all
> I am sure this one has been ask before but here goes. I have a Cisco
> 2501 router in-which I have installed new boot roms and flash memory.
> When I connect to it using HyperTerminal all I get is little spades
> and " " " " in the HyperTerminal window. Can anyone tell me what is
> going on and how to fix it or direct me to a helpful website?
> Thanks all.
>
|
|
|
|
|