|
Home > Archive > alt.certification.cisco > June 2003 > Re: Configuration Problem: CISCO 1700 HELP ME PLEASE !!!!!!
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Re: Configuration Problem: CISCO 1700 HELP ME PLEASE !!!!!!
|
|
| Stuart 2003-06-26, 3:24 pm |
|
On Thu, 26 Jun 2003, DarejDok (Dariusz D=B1browski) wrote:
> ip route 0.0.0.0 0.0.0.0 Ethernet0
I was always told that you could only put the interface name in if it was
a ppp link which this doesn't appear to be. Try putting the next hop
router address instead of ethernet0.
| |
| DarejDok \(Dariusz D±browski\) 2003-06-26, 3:25 pm |
| Użytkownik "Stuart" <caba@stuff.com> napisał w wiadomo¶ci
news:Pine.LNX.4.44.0306262050510.7314-100000@serv1.caba.dynu.com...
On Thu, 26 Jun 2003, DarejDok (Dariusz D±browski) wrote:
> ip route 0.0.0.0 0.0.0.0 Ethernet0
--I was always told that you could only put the interface name in if it was
--a ppp link which this doesn't appear to be. Try putting the next hop
--router address instead of ethernet0.
How should I make it ?
I am a beginner in this subject =((((
Full hardware config is like this:
[INTERNET]--->PHONE_LINE-------->| DSL_MODEM (120.1.2.1) | ---->
--->ETH_LINE -----> | CISCO 1700 (120.1.2.3)(10.1.1.244)| --->LAN
(ETH) --->|MY TEST PC (10.1.1.253|
From CISCO 1700
I can ping: 120.1.2.1 and 10.1.1.253
I can't ping INTERNET
From TEST PC
I can ping: 10.1.1.244 and 120.1.2.3 and 120.1.2.1
I can't ping INTERNET
After connecting ETH_LINE from DSL_MODEM directly to MY TEST PC and
seting default gateway to 120.1.2.1 everything working fine !!!!
BUT IT DOSN'T WORK via CISCO router !!!! WHY ????
I tested it again: after connecting ETH_LINE from DSL_MODEM directly to MY
TEST PC and
set default gateway to 120.1.2.1 AND set IP ADDRESS to 120.1.2.3
(on my TEST PC ofcourse) everything working fine !!!!
After inserting CISCO router betwean DSL_MODEM and TEST PC, and set
CISCO IPs like was on the TEST PC, it dosn't work.
Maybe i should set something like "default gateway" on my CISCO ?????????
Could you think about it, please ?
Darek
| |
| Stuart 2003-06-26, 3:25 pm |
|
On Thu, 26 Jun 2003, DarejDok (Dariusz D=B1browski) wrote:
> On Thu, 26 Jun 2003, DarejDok (Dariusz D=B1browski) wrote:
>
> > ip route 0.0.0.0 0.0.0.0 Ethernet0
>
> --I was always told that you could only put the interface name in if it w=
as
> --a ppp link which this doesn't appear to be. Try putting the next hop
> --router address instead of ethernet0.
>
> How should I make it ?
> I am a beginner in this subject =3D((((
>
>
> [INTERNET]--->PHONE_LINE-------->| DSL_MODEM (120.1.2.1) | ---->
> --->ETH_LINE -----> | CISCO 1700 (120.1.2.3)(10.1.1.244)| --->LAN
> (ETH) --->|MY TEST PC (10.1.1.253|
>
next hop router is your dsl router so:
ip route 0.0.0.0 0.0.0.0 120.1.2.1
| |
| DarejDok \(Dariusz D±browski\) 2003-06-26, 3:25 pm |
|
Użytkownik "Stuart" <caba@stuff.com> napisał w wiadomo¶ci
news:Pine.LNX.4.44.0306262108210.7355-100000@serv1.caba.dynu.com...
On Thu, 26 Jun 2003, DarejDok (Dariusz D±browski) wrote:
> On Thu, 26 Jun 2003, DarejDok (Dariusz D±browski) wrote:
>
> > ip route 0.0.0.0 0.0.0.0 Ethernet0
>
> --I was always told that you could only put the interface name in if it
was
> --a ppp link which this doesn't appear to be. Try putting the next hop
> --router address instead of ethernet0.
>
> How should I make it ?
> I am a beginner in this subject =((((
>
>
> [INTERNET]--->PHONE_LINE-------->| DSL_MODEM (120.1.2.1) | ---->
> --->ETH_LINE -----> | CISCO 1700 (120.1.2.3)(10.1.1.244)| --->LAN
> (ETH) --->|MY TEST PC (10.1.1.253|
>
next hop router is your dsl router so:
ip route 0.0.0.0 0.0.0.0 120.1.2.1
EUREKA !!! IT WORKS !!!
I tried it while I was waiting to your answer !!
THANKS A LOT !!
Darek
|
|
|
|
|