| Author |
Does anyone have an answer to this question?
|
|
| Ben Nelson 2003-03-26, 9:24 pm |
| Does anyone have an answer to this question?
have a 2600 and 2501 router. I also have 2 1912 switches. Is there anyway
to connect the two routers without a CSU/DSU? I would like to have 2
seperate broadcast domains with a swich on opposite ends of the routers. I
feel this would be the best way to study for my CCNA. Any tips or
suggestions? The only way I can see to connect them is with both switches in
the same broadcast domain with each router on outside of each switch? I
heard that Cisco made a cable to connect both routers via their S 0 ports
that acted as a CSU/DSU. Is this true?
Any help would be greatly appreciated.
If you could post the answer here it would be great.
http://www.usedrouter.com/forumasp/...sts&fid=2&tid=1
63
Thanks
| |
| Ben Nelson 2003-03-26, 9:24 pm |
| This is the correct link for this question.
http://www.usedrouter.com/forumasp/...sts&fid=2&tid=1
63
"Ben Nelson" <Ben@nospam.mchsi.com> wrote in message
news:attga.222398$eG2.35227@sccrnsc03...
> Does anyone have an answer to this question?
>
> have a 2600 and 2501 router. I also have 2 1912 switches. Is there anyway
> to connect the two routers without a CSU/DSU? I would like to have 2
> seperate broadcast domains with a swich on opposite ends of the routers. I
> feel this would be the best way to study for my CCNA. Any tips or
> suggestions? The only way I can see to connect them is with both switches
in
> the same broadcast domain with each router on outside of each switch? I
> heard that Cisco made a cable to connect both routers via their S 0 ports
> that acted as a CSU/DSU. Is this true?
>
> Any help would be greatly appreciated.
>
> If you could post the answer here it would be great.
>
>
http://www.usedrouter.com/forumasp/...sts&fid=2&tid=1
> 63
>
> Thanks
>
>
| |
| Hansang Bae 2003-03-26, 9:24 pm |
| In article <attga.222398$eG2.35227@sccrnsc03>, Ben@nospam.mchsi.com
says...
> Does anyone have an answer to this question?
>
> have a 2600 and 2501 router. I also have 2 1912 switches. Is there anyway
> to connect the two routers without a CSU/DSU? I would like to have 2
> seperate broadcast domains with a swich on opposite ends of the routers. I
> feel this would be the best way to study for my CCNA. Any tips or
> suggestions? The only way I can see to connect them is with both switches in
> the same broadcast domain with each router on outside of each switch? I
> heard that Cisco made a cable to connect both routers via their S 0 ports
> that acted as a CSU/DSU. Is this true?
>
> Any help would be greatly appreciated.
>
> If you could post the answer here it would be great.
>
> http://www.usedrouter.com/forumasp/...sts&fid=2&tid=1
> 63
Sure. Just get some back-to-back serial cables. Check out
www.pacificcable.com for Cisco Equiv cables. Or you can check out
www.anthonypanda.com or www.kg2.com. All are reputable dealers with
great prices.
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
******************************
******************************
********
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
******************************
******************************
********
|
|
|
|