|
Home > Archive > alt.certification.cisco > March 2003 > AS5300 help
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| any one ever seen this on a AS5300
- Process= "DHCPD Receive",ipl= 0, pid=45
then i get a %sys-2-getbuf: Bad getbuffer, bytes=43540
i get this quite often but does not seem to effect any dialup users, I have
searched the net for weeks but i not found much on this. any help would be
great
thanks
IOS version is 12.0(4)T1
4 port 96 modem unit
| |
| Hansang Bae 2003-03-24, 10:24 pm |
| In article < 3e7fcf01$0$9679$724ebb72@reade
r2.ash.ops.us.uu.net>,
ron@zippytech.com says...
> any one ever seen this on a AS5300
>
> - Process= "DHCPD Receive",ipl= 0, pid=45
>
> then i get a %sys-2-getbuf: Bad getbuffer, bytes=43540
>
> i get this quite often but does not seem to effect any dialup users, I have
> searched the net for weeks but i not found much on this. any help would be
> great
>
> thanks
>
> IOS version is 12.0(4)T1
> 4 port 96 modem unit
Well, you are running an old T train so all bets are off. But Cisco
says:
----------------------------------------------------
%SYS-2-GETBUF (x1): Bad getbuffer, bytes= [dec]
Explanation: The software requested a buffer that is larger than the
largest configured buffer size, or it requested a negative-sized buffer.
Recommended Action: When reporting this condition, copy the error
message exactly as it appears on the console or in the system log,
include the associated stack trace, contact your Cisco technical support
representative, and provide the representative with the gathered
information.
----------------------------------------------------
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
******************************
******************************
********
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
******************************
******************************
********
| |
|
| i have seen this on the net, but nothing more is this a rare problem?
"Ron" <ron@zippytech.com> wrote in message
news:3e7fcf01$0$9679$724ebb72@
reader2.ash.ops.us.uu.net...
> any one ever seen this on a AS5300
>
> - Process= "DHCPD Receive",ipl= 0, pid=45
>
> then i get a %sys-2-getbuf: Bad getbuffer, bytes=43540
>
> i get this quite often but does not seem to effect any dialup users, I
have
> searched the net for weeks but i not found much on this. any help would be
> great
>
> thanks
>
> IOS version is 12.0(4)T1
> 4 port 96 modem unit
>
>
|
|
|
|
|