|
Home > Archive > alt.certification.cisco > December 2003 > C4000
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| networking 2003-12-24, 2:24 pm |
| Hello
I have a problem with one of my routers here. It is a c4000-M router with 4
flash and 16 DRAM, when ever I start it it hangs, here is the output, I
really need help with this, hope some one will be kind enough and let me
know whats ging on with this router. Thank you in advance.
System Bootstrap, Version 4.14(7), SOFTWARE
Copyright (c) 1986-1994 by cisco Sys
4000 processor with 16384 Kbytes of main memory
Unknown or ambiguous service arg - udp-small-servers
Unknown or ambiguous service arg - tcp-small-servers
Illegal IP keyword - classless
Booting c4000-j-mz_112-17.bin from Flash address space
rrrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
r
[OK - 3701293/16108114 bytes]
F3: 8852+3692409+165008 at 0x12000
Self decompressing the image :
##############################
###################
##############################
##############################
############
####################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operati
IOS (tm) 4000 Software (C4000-J-M), Version 11.2(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 04-Jan-99 18:33 by ashah
Image text-base: 0x00012000, data-base: 0x007716E4
cisco 4000 (68030) processor (revision 0xB0) with 16384K/16384K bytes of
memory.
Processor board ID 5005784
G.703/E1 software, Version 1.0.
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation softw
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
%LINK-3-UPDOWN: Interface Serial0, changed state to down
%LINK-3-UPDOWN: Interface Serial1, changed state to down
%LINK-3-UPDOWN: Interface Ethernet0, changed state to up
%LINK-3-UPDOWN: Interface Ethernet1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to
down
%SYS-5-CONFIG_I: Configured from memory by console
%SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 4000 Software (C4000-J-M), Version 11.2(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 04-Jan-99 18:33 by ashah
%LINK-5-CHANGED: Interface Ethernet0, changed state to administratively down
%LINK-5-CHANGED: Interface Ethernet1, changed state to administratively down
%LINK-5-CHANGED: Interface Serial0, changed state to administratively down
"It just hang here"
| |
| Hansang Bae 2003-12-24, 4:24 pm |
| In article <XLkGb.47716$ss5.8348@clgrps13>, digitalzone3000@hotmail
.com
says...
> Hello
> I have a problem with one of my routers here. It is a c4000-M router with 4
> flash and 16 DRAM, when ever I start it it hangs, here is the output, I
> really need help with this, hope some one will be kind enough and let me
> know whats ging on with this router. Thank you in advance.
[snip]
> %LINK-5-CHANGED: Interface Ethernet1, changed state to administratively down
> %LINK-5-CHANGED: Interface Serial0, changed state to administratively down
> "It just hang here"
Two things to try.
1) Turn off flow control as console port cannot do any type of flow
control.
2) Try loading IP Only image as opposed to an enterprise image.
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
******************************
******************************
********
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
******************************
******************************
********
| |
|
| I realize this may sound dumb, but I have a C4000 as well, same model, I get
that, but I have to press the enter key a few times for the prompt to
appear..
"networking" <digitalzone3000@hotmail.com> wrote in message
news:XLkGb.47716$ss5.8348@clgrps13...
> Hello
> I have a problem with one of my routers here. It is a c4000-M router with
4
> flash and 16 DRAM, when ever I start it it hangs, here is the output, I
> really need help with this, hope some one will be kind enough and let me
> know whats ging on with this router. Thank you in advance.
>
> System Bootstrap, Version 4.14(7), SOFTWARE
> Copyright (c) 1986-1994 by cisco Sys
> 4000 processor with 16384 Kbytes of main memory
>
> Unknown or ambiguous service arg - udp-small-servers
> Unknown or ambiguous service arg - tcp-small-servers
> Illegal IP keyword - classless
> Booting c4000-j-mz_112-17.bin from Flash address space
> rrrrrrrrrrrrrrrrrrrrrrrrr
> rrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
r
> [OK - 3701293/16108114 bytes]
> F3: 8852+3692409+165008 at 0x12000
> Self decompressing the image :
> ##############################
###################
> ##############################
##############################
############
> ####################### [OK]
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
>
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operati
> IOS (tm) 4000 Software (C4000-J-M), Version 11.2(17), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Mon 04-Jan-99 18:33 by ashah
> Image text-base: 0x00012000, data-base: 0x007716E4
>
> cisco 4000 (68030) processor (revision 0xB0) with 16384K/16384K bytes of
> memory.
>
> Processor board ID 5005784
> G.703/E1 software, Version 1.0.
> Bridging software.
> SuperLAT software copyright 1990 by Meridian Technology Corp).
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> TN3270 Emulation softw
> 2 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 128K bytes of non-volatile configuration memory.
> 4096K bytes of processor board System flash (Read/Write)
>
>
>
> Press RETURN to get started!
>
>
> %LINK-3-UPDOWN: Interface Serial0, changed state to down
> %LINK-3-UPDOWN: Interface Serial1, changed state to down
> %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> %LINK-3-UPDOWN: Interface Ethernet1, changed state to up
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state
to
> down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1, changed state
to
> down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to
> down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to
> down
> %SYS-5-CONFIG_I: Configured from memory by console
> %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 4000 Software (C4000-J-M), Version 11.2(17), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Mon 04-Jan-99 18:33 by ashah
> %LINK-5-CHANGED: Interface Ethernet0, changed state to administratively
down
> %LINK-5-CHANGED: Interface Ethernet1, changed state to administratively
down
> %LINK-5-CHANGED: Interface Serial0, changed state to administratively down
> "It just hang here"
>
>
|
|
|
|
|