| Author |
problem connecting to 2503
|
|
| only dvds 2003-10-29, 8:24 pm |
| Need a hint to get going..
I am attempting to connect to a 2503 router...
Using 0, when I put in the suggested settings...all I get is a blank
screen..
I have a DB-9 from COMB to a RJ-45 cable which connects to the console
port... the light indicates all is well...but I can't get anything on the
screen...
Any suggestions?
Thanks
| |
| Claude LeFort 2003-10-29, 9:25 pm |
| what are your emulator settings?
Should be 9600-none-1
Claude
--
*****to e-mail me directly remove NOSPAM in e-mail address*******
"only dvds" <info@onlydvds.ca> wrote in message
news:CjZnb.1895$9j3.372722@news20.bellglobal.com...
> Need a hint to get going..
>
> I am attempting to connect to a 2503 router...
>
> Using 0, when I put in the suggested settings...all I get is a blank
> screen..
>
> I have a DB-9 from COMB to a RJ-45 cable which connects to the console
> port... the light indicates all is well...but I can't get anything on the
> screen...
>
> Any suggestions?
>
> Thanks
>
>
>
| |
|
| Are you using a rollover cable?
"only dvds" <info@onlydvds.ca> wrote in message
news:CjZnb.1895$9j3.372722@news20.bellglobal.com...
> Need a hint to get going..
>
> I am attempting to connect to a 2503 router...
>
> Using 0, when I put in the suggested settings...all I get is a blank
> screen..
>
> I have a DB-9 from COMB to a RJ-45 cable which connects to the console
> port... the light indicates all is well...but I can't get anything on the
> screen...
>
> Any suggestions?
>
> Thanks
>
>
>
| |
| Faisal Aslam 2003-10-30, 2:24 pm |
| Hi
I have the same problem with one of my 2503 routers. It was working fine
until now, nothing is displayed in hyperterminal but if i connect the
console cable to the other 2503 everything works fine. The settings for
hyperterminal are correct.
Thanks
"Grey" <bbb@ccc.com> wrote in message
news:zfSdnfYWabLqHj2iRVn-jg@comcast.com...
> Are you using a rollover cable?
>
> "only dvds" <info@onlydvds.ca> wrote in message
> news:CjZnb.1895$9j3.372722@news20.bellglobal.com...
> > Need a hint to get going..
> >
> > I am attempting to connect to a 2503 router...
> >
> > Using 0, when I put in the suggested settings...all I get is a blank
> > screen..
> >
> > I have a DB-9 from COMB to a RJ-45 cable which connects to the console
> > port... the light indicates all is well...but I can't get anything on
the
> > screen...
> >
> > Any suggestions?
> >
> > Thanks
> >
> >
> >
>
>
| |
| Wrinklytech 2003-10-31, 9:24 am |
| Hi
Just a wild thought. Since these are 2503s they have ISDN port.
Have heard of damage in the past caused by putting ISDN line connection
into CON or AUX by mistake (all are RJ45 pattern). ISDN lines carry
transient voltages of up to 100 - 150 V, which can fry the circuitry in
the wrong ports.
HTH
Vaughan
"Faisal Aslam" <faisal_aslam@hotmail.com> wrote in message
news:Chdob.2646$lm1.13888@wards.force9.net...
> Hi
>
> I have the same problem with one of my 2503 routers. It was working
fine
> until now, nothing is displayed in hyperterminal but if i connect the
> console cable to the other 2503 everything works fine. The settings
for
> hyperterminal are correct.
>
> Thanks
> "Grey" <bbb@ccc.com> wrote in message
> news:zfSdnfYWabLqHj2iRVn-jg@comcast.com...
> > Are you using a rollover cable?
> >
> > "only dvds" <info@onlydvds.ca> wrote in message
> > news:CjZnb.1895$9j3.372722@news20.bellglobal.com...
> > > Need a hint to get going..
> > >
> > > I am attempting to connect to a 2503 router...
> > >
> > > Using 0, when I put in the suggested settings...all I get is a
blank
> > > screen..
> > >
> > > I have a DB-9 from COMB to a RJ-45 cable which connects to the
console
> > > port... the light indicates all is well...but I can't get anything
on
> the
> > > screen...
> > >
> > > Any suggestions?
> > >
> > > Thanks
> > >
> > >
> > >
> >
> >
>
>
|
|
|
|