|
Home > Archive > alt.certification.cisco > January 2003 > CCIE Lab
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| Hello everyone,
I am considering building out a lab at home to practice for the routing and
switching lab.
Does anyone have any suggestions what at a minimum I would need?
Thanks
Pete
| |
| jlefko 2003-01-24, 10:24 pm |
| Here is what I have an I can emulate almost anything:
3550
2912
2611
2611 ethernet serial
2611 frame relay and ethernet
2503 frame relay and ISDN, ethernet
2503 frame relay and ISDN, ethernet
4500 (frame relay switch) 2 ethernet, 4 serial
On 1/24/03 4:16 PM, in article
sHkY9.360136$FT6.68588813@news4.srv.hcvlny.cv.net, "Pete"
<plopez@optonline.net> wrote:
> Hello everyone,
> I am considering building out a lab at home to practice for the routing and
> switching lab.
> Does anyone have any suggestions what at a minimum I would need?
> Thanks
> Pete
>
>
>
| |
| Jonathan 2003-01-24, 11:23 pm |
|
"Pete" <plopez@optonline.net> wrote in message
news:sHkY9.360136$FT6.68588813@news4.srv.hcvlny.cv.net...
> Hello everyone,
> I am considering building out a lab at home to practice for the routing
and
> switching lab.
> Does anyone have any suggestions what at a minimum I would need?
> Thanks
> Pete
3550
2509
2522
2501 (2 or 3)
2514
2610 (with FXS ports)
2503 (get two for ISDN)
ISDN Switch (or two ISDN lines)
Jonathan
>
>
>
|
|
|
|
|