|
Home > Archive > CCIE > December 2002 > 3640 router RAM & IOS
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
3640 router RAM & IOS
|
|
| haseeb_eng 2002-12-01, 7:34 am |
| in 3640 router i had installed Nm-1FE2W(1 fastethernet and 2 wan slot ) module but the router does not reongnizes it . I had checked other modules are working fine i had changed the slot also but also same problem . It seems that there is some problem with the module itself . I will paste router's reboot message and shopw version also please have a look and tell me what could be the possible problem if network module is ok .
sh ver
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-DS-M), Version 12.0(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 16-Jun-99 12:37 by phanguye
Image text-base: 0x60008918, data-base: 0x60A9C000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Router uptime is 2 minutes
System restarted by power-on
System image file is "flash:c3640-ds-mz.120-5"
cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of memory.
Processor board ID 25129224
R4700 processor, Implementation 33, Revision 1.0
Channelized E1, Version 1.0.
MICA-6DM Firmware: CP ver 2310 - 6/3/1998, SP ver 2310 - 6/3/1998.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
60 terminal line(s)
2 Channelized E1/PRI port(s)
--More-- DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#
þ
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
program load complete, entry point: 0x80008000, size: 0x5b5888
Self decompressing the image : ##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
##############################
################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-DS-M), Version 12.0(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 16-Jun-99 12:37 by phanguye
Image text-base: 0x60008918, data-base: 0x60A9C000
cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of memory.
Processor board ID 25129224
R4700 processor, Implementation 33, Revision 1.0
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
60 terminal line(s)
2 Channelized E1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
00:00:04: %PA-2-UNDEFPA: Undefined Port Adaptor type 215 in bay 0
00:00:12: %LINK-4-NOMAC: A random default MAC address of 0000.0c8c.9224 has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-DS-M), Version 12.0(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 16-Jun-99 12:37 by phanguye
Router> | |
|
|
|
| Haseeb, I beleive you need to change your IOS, give it a try otherwise your hardware may have problem.
try one of these below. for 3640 router
can support Channelized E1, Primary Rate ISDN, Nm-1FE2W.
12.0(7)XK
12.1(1)T
12.2
12.2T
Regards | |
| akohli8745 2002-12-02, 9:04 am |
| I agree. I have had the same problem at work. Try to install IOS 12.2.8T5 (ip feature) and that should pick up the card. If you have problems loading the IOS just make sure you have enough flash and DRAM. | |
| haseeb_eng 2002-12-03, 1:14 am |
| thanks everybody for your reply . In order to install 12.0(7)XK you should have 8MB flash and 32MB Ram . Flash is OK but if you see in the show version command the ram is 125K . In my previous post i had paste sh ver command of the router just have a look on this too . I can't understand this 125k thingy . | |
| Adorik 2002-12-03, 4:34 am |
| hi,
u have 32 mb (24+8) of ram and 125k of nvram for the config
ciao
Adorik | |
| haseeb_eng 2002-12-09, 2:48 am |
| issue is solved . i ha upgrade the ios through rommon . thanks everybody for your corporation |
|
|
|
|