| haseeb_eng 2002-11-12, 7:20 am |
| i was trying to config ATM module but it seems that it does not support MPOA commands . MPOA configuration is optional or is it necessary ? I could'nt understand the concept of MPOA also . And please tell me that in order to support these commands which IOS version do i need ?
Switch#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)XU, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 03-Apr-00 16:37 by swati
Image text-base: 0x00003000, data-base: 0x00301398
ROM: Bootstrap program is C2900XL boot loader
Switch uptime is 30 minutes
System returned to ROM by power-on
System image file is "flash:c2900XL-c3h2s-mz-120.5-XU.bin"
cisco WS-C2924M-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byt
es of memory.
Processor board ID 0x10, with hardware revision 0x03
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:02:16:AD:EF:C0
Module Ports Model HW Version SW version
------ ----- ----- ---------- ----------
2 1 WS-X2961-XL 0 12.0(2)XF1
Configuration register is 0xF |