|
| Which is correct answer ? Please expain detail answer.
Thank you
timch@2bsure.com
1.Which of the following are associated with the routing of IP?
A.ISO
B.FTP
C.OSPF
D.Integrated IS-IS
E.Static routes
2.In anticipation of connecting new sites to the network, a leased serial line
between Routers A and B is replaced by an X.25 network. The intent is to tunnel
or encapsulate the IP (and any other protocal traffic in X.25.
The X.121 address assigned to Router A is 31373105551212 and the X.121 address
assigned to Router B is 31374089767399. What remaining configuration change
need to be made to Router A and B ?
A. change the serial interface to encapsulation 25
B. configure the x.121 address on the serial interface
C. ensure the correct packet size, window size, and timer match the X.25 network
D. configure the x25 map commands for each protocal being sent through the X.25
network.
3.A new Cisco router has no configuration defined. Which methods can be used to
configure to the router for the first time ?
A.using SNMP via a network management station
B.connecting a terminal to the console port and running the Setup dialogue
C.connecting a terminal to the console port and directly typing in configuration
commands.
D.using BOOTP/SLARP/RARP to download a configuration file that has been created
ahead of time.
E.Connecting a terminal to the console port,defining a minimal configuration,
connecting the router to the network, and using TFTP to download a configuration
file that has been created ahead of time.
4.When troubshooting a serial interface, which of the following can be the result
of sending a loop up signal from a DSU/CSU ? (multiple answer )
A.the remote end should return the signal within 5 second of application.
B.the lie is taken out of service.
C.the CSU will reset.
D.D4 will not have proper framing bits.
5.Which of the following is true about RIP v1?
A.RIP v1 is a classful routing protocol.
B.RIP v1 does not carry subnet information in its routing updates.
C.RIP v1 does not support Variable Length Subnet Masks (VLSM)
D.RIP v1 can support discontiguous networks.
6.Which of the following are features of the SNMP management protocol ?
A.unsolicited traps
B.bandwidth allocation
C.polled information collection
D.Guaranteed delivery of information and commands
E.Uses a defined hierarchical structure for management information. |
|