|
Home > Archive > CCIE > November 2001 > Cisco Flash
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Aries 2001-11-03, 12:32 am |
| I have an 8 MB Flash for my 2503, and I am thinking to load an IOS that is more than 8MB.
Can I have one more 8 MB Flash in another slot and make it as 16 MB Flash? Is this possible? If Yes, how can I configure it?
Thanks, | |
|
| yes, you can.
But, you will need to combine the two flash together.
If I'm not wrong, the command would be
no partition flash | |
| Aries 2001-11-03, 10:54 am |
| Thanks Orcs,
then, what will happen if I took one of them after I combineed them.
the single flash will work? | |
|
| Well, if 2 pieces of 8Mb will give you a 16Mb and your IOS is more than 8Mb, definitely, it's not going to work.
But, if I did not remember wrongly.....
If your IOS is less than 8Mb and you take out one of the flash(not containing), it will still work.
I think you better try it on a non-production/ non-operational router just in case I remembered wrongly | |
| Yankee 2001-11-04, 8:00 am |
| It will work.
Yankee | |
| Aries 2001-11-04, 11:52 am |
| hum..........I will give it a try then
thanks you guys.. | |
|
|
| Aries 2001-11-05, 12:22 am |
| Yeti,
Thanks for your help and information |
|
|
|
|