Home > Archive > CCIE > October 2001 > 2511 reverse can not work for 3 days





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author 2511 reverse can not work for 3 days
rootstock

2001-10-14, 9:15 am

2511#sh line¡¡
Tty Typ¡¡¡¡ Tx/Rx¡¡¡¡A Modem¡¡Roty AccO AccI¡¡ Uses¡¡ Noise¡¡Overruns¡¡ Int
¡¡ 0 CTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 1 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 2 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 3 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 4 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 5 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 6 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 7 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 8 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡ 9 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡2¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡10 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 1¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡11 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡12 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡13 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡14 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡15 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡16 TTY¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡17 AUX¡¡ 9600/9600¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
* 18 VTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡8¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
* 19 VTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡2¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡20 VTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡21 VTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -
¡¡22 VTY¡¡¡¡¡¡¡¡¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡-¡¡¡¡-¡¡¡¡-¡¡¡¡¡¡0¡¡¡¡¡¡ 0¡¡¡¡ 0/0¡¡¡¡¡¡ -

2511#¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
2511#¡¡
2511#ping 10.0.0.1¡¡

Type escape sequence to abort.¡¡
Sending 5, 100-byte ICMP Echos to 10.0.0.1, timeout is 2 seconds:
!!!!!¡¡
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms
2511#telnet 10.0.0.1 2009¡¡
Trying 10.0.0.1, 2009 ... Open¡¡
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡¡¡¡¡¡¡¡

10.0.0.1 is lookbackup interface¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

why was the problem?

i did upgrade ios to 12.0 and degrade to 11.3, after degrade to 11.3, only the line 17 was work. aux could not work neither.
i erased the evrom and reboot the router, the problem still remained.
what is the problem anyway?
Sponsored Links





Free Braindumps | MCSE braindumps software forum

Copyright 2003 - 2008 examnotes.net