CCIE - question

Author

question

2000-11-16, 12:11 am

okay hope someone can help?????

Here's my Wan configuration:
cisco 2514 router
S0: 84.161.124.1/30
E0:84.161.194.1/25
I also have avail IP range of 84.161.194.2-84.161.194.126/25
MY 2514 connects to a E0 PIXFIREWALL
E0: 84.161.194.2/30
E1

Inside)???
The E1 will connect to a ethernet1/0 port on a 3640 router. The INTRANET(lan) will be connected to the FASTETHERNET port on the 3640 router? My question is if I use NAT on my PIX, should I also need to configure nat on my 3640? IF I use 10.1.0.0 255.255.0.0 as The Inside address on the PIX, Can I configure my gateway on the 3640 fastethernet to 10.1.1.100?? IF yes, then should I use a different subnet to connect the e1 of the pix to the e1/0 of the 3640?

Sponsored Links