| Author |
Enforcers 216 QOD (2/7)
|
|
| enforcer 2003-07-02, 6:33 am |
| hairy51 is the administrator of a Windows 2000 Server network. The network contains two Windows 2000 Servers and one NetWare server running NetWare version 3.12.
hairy51 has installed the NWLink IPX/SPX/NetBIOS Compatible Transport Protocol on the Windows 2000 Servers. To which setting does the frame type default for the Windows 2000 Servers?
A. Ethernet II.
B. Auto Detect.
C. Ethernet SNAP.
D. Ethernet 802.3.
E. Ethernet 802.2.
F. Manual
Answer tomorrow. | |
| Timbos 2003-07-02, 8:40 am |
| I go for E!
Thanks! | |
| B4yaman3 2003-07-02, 8:44 am |
| I am going with B! | |
| cramersaunders 2003-07-02, 12:04 pm |
| E | |
| Tarzanboy 2003-07-02, 12:18 pm |
| B
Cheers,
TB | |
| enforcer 2003-07-04, 3:53 am |
| quote:
Originally posted by enforcer
hairy51 is the administrator of a Windows 2000 Server network. The network contains two Windows 2000 Servers and one NetWare server running NetWare version 3.12.
hairy51 has installed the NWLink IPX/SPX/NetBIOS Compatible Transport Protocol on the Windows 2000 Servers. To which setting does the frame type default for the Windows 2000 Servers?
A. Ethernet II.
B. Auto Detect.
C. Ethernet SNAP.
D. Ethernet 802.3.
E. Ethernet 802.2.
F. Manual
Answer tomorrow.
and the answer is E. Ethernet 802.2
Ethernet 802.2 is the default frame type for NWLink | |
| Tarzanboy 2003-07-04, 5:03 am |
| Hmmm....
When you install NWLink, it default installs to Auto Detect.
All versions of Novell post 3.12 (when running IPX/SPX) use a frame type of 802.2, however you may have multiple frame types running on the Novell server and should that be the case, Auto Detect will set the type to 802.2.
There are several articles on this:
Configuring NWLink
NWLink Concepts
Cheers,
TB | |
| Timbos 2003-07-04, 5:14 am |
| TB, What you said right there is 100% correct. Myself I was doubting between B and E because this following sentence was not quite clear to me:
"To which setting does the frame type default for the Windows 2000 Servers". | |
| hairy51 2003-07-04, 9:13 am |
| i was tempted to go for D at first glance, but i think i will go with the others and say E.
Maybe i will get the sack though.... | |
| adam salam 2003-07-04, 12:51 pm |
| this Q is very easy to answer, but even that is true there is a littel bit confusing 
the default frame-type configuration for windows2000 is Auto-detect, that's true.
the default frame-type for Netware 3.12 and above is 802.3, that's true aso.
that put you in doubt, choosing w2k default, or Netware default 
I think that's the source of confusing | |
| Tarzanboy 2003-07-04, 1:02 pm |
| This was something covered on my exam, so be careful, as 802.3 is Novell 2.x-3.11.
Cheers,
TB |
|
|
|