|
Home > Archive > 70-216 > April 2002 > Sun 70-216 Question of the Day
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Sun 70-216 Question of the Day
|
|
| wbafrank 2002-04-28, 2:32 pm |
|  And today's poser is ....
Q80. You are the administrator for a Windows 2000 network. The network uses Windows 2000 Server computers and Windows 2000 Professional client computers. NAT is enabled on the network, along with DHCP. You want to configure the IP addresses for a NAT interface that connects to the Internet. You have the following IP address configuration:
IP Addresses:
200.100.100.212
200.100.100.213
200.100.100.214
200.100.100.215
Subnet Mask:
255.255.255.252
From Routing and Remote Access, which steps should you take to accomplish this task? [b](Choose all that apply)
A. From the Address Pool tab, click Add.
B. From the Special Ports tab, click Add.
C. Enter 255.255.255.252 in the Mask field.
D. Enter 200.100.100.215 in the End Address field.
E. Enter 200.100.100.212 in the Start Address field.
F. From IGMP, right-click the interface to configure, and click Properties.
G. From Network Address Translation, right-click the interface to configure, and click Properties.
Good Luck .... see you tomorrow for the answer!! | |
| Flubber6755 2002-04-28, 2:37 pm |
| G,A,C,D,E | |
| Zaraspook 2002-04-28, 2:54 pm |
| How about A, C, E, & G?  | |
| KScheler 2002-04-28, 5:27 pm |
| A,C,D,E,G | |
| wbafrank 2002-04-29, 3:48 pm |
| quote:
Originally posted by wbafrank
And today's poser is ....
Q80. You are the administrator for a Windows 2000 network. The network uses Windows 2000 Server computers and Windows 2000 Professional client computers. NAT is enabled on the network, along with DHCP. You want to configure the IP addresses for a NAT interface that connects to the Internet. You have the following IP address configuration:
IP Addresses:
200.100.100.212
200.100.100.213
200.100.100.214
200.100.100.215
Subnet Mask:
255.255.255.252
From Routing and Remote Access, which steps should you take to accomplish this task? [b](Choose all that apply)
A. From the Address Pool tab, click Add.
B. From the Special Ports tab, click Add.
C. Enter 255.255.255.252 in the Mask field.
D. Enter 200.100.100.215 in the End Address field.
E. Enter 200.100.100.212 in the Start Address field.
F. From IGMP, right-click the interface to configure, and click Properties.
G. From Network Address Translation, right-click the interface to configure, and click Properties.
Good Luck .... see you tomorrow for the answer!!
And the answer is ....
Correct Answers: A, C, E and G
You can use Routing and Remote Access to configure the IP addresses for the NAT interface that connects to the Internet. You can use the following steps to configure the interface:
1. From Network Address Translation, right-click the interface to configure, and click Properties.
2. From the Address Pool tab, click Add.
3. Enter 200.100.100.212 in the Start Address field.
4. Enter 255.255.255.252 in the Mask field.
When you are given a range of IP addresses, and that range can be identified with a subnet mask, you only need to enter the starting IP address and the subnet mask. |
|
|
|
|