|
Home > Archive > 70-216 > January 2002 > Help me please with these questions ...!
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Help me please with these questions ...!
|
|
| safouh 2002-01-06, 3:20 pm |
| Hi all again ,
Thank you very much for your help , but through my study I got these three questions from Skilldrill.com that confuse me, so can you please help me to get the right answers of it ..., I will appreciate your Support
---------------------------------------------
Q1. You are the administrator for a Windows 2000 network. The network contains four Windows 2000 server computers that use IPSec to secure the network communication. While using IPSec Monitor, you determine that hard security associations (SAs) are not being established between computers. After running IPSec Monitor on one of the computers, you find that a soft SA exists between two of the computers. You also find that the security setting for the SA is set to "None". You stop all traffic until the SA times out and verify the SA is gone. Then you start the traffic again. A hard SA is automatically established. What must you do to delete all soft SAs? ( one answer only )
A. Delete the SAs from the IPSec Monitor.
B. Stop all traffic.
C. Restart the policy agent.
D. Refresh the IPSec Monitor.
E. Reboot the server computers.
-------------------------------------------
Q2. Melvin, a consultant hired by a manufacturing company, has been asked to set up a Windows 2000 RAS to allow the company's legacy UNIX computers to dial in and update data. Can Melvin accomplish this and why or why not? ( one answer only )
A. Yes. Melvin can build the RAS and configure the inbound connection to SLIP.
B. No, Windows 2000 RAS supports SLIP on outbound connections only. Windows 2000 does not have a component for inbound SLIP connection over RAS.
C. No, UNIX does not share a common communications protocol with Windows 2000. They would have to purchase a gateway to connect the two networks.
D. Yes, legacy UNIX systems were the first to use Point-to-Point Protocol (PPP) and could connect easily to the Windows 2000 network.
-------------------------------------------
Q3. You are attempting to resolve a communication problem with a computer named adm20 on a remote subnet. You can successfully PING other computers on the same subnet as adm20. However, when you try to PING the IP address of adm20, you get no response. Which of the following could be the problem? ( one answer only )
A. Adm20 has an incorrect DHCP Server.
B. Adm20 has an incorrect default gateway.
C. Your default gateway is configured incorrectly.
D. Adm20 is not the correct host name of the computer you are trying to contact.
E. Adm20 has a NetBIOS Scope ID that is different than the other computers, including yours.
 | |
| safouh 2002-01-07, 3:29 am |
| HI ... for you all , here are the answers ...
Q1. C ( from TechNet )
Q2. B ( you can also get this from TechNet )
Q3. B ( as I discussed with other guys )
I hope for you all success and and for me also because today I have this exam ...
Cheers , |
|
|
|
|