|
| Well actually there are 22 questions. I would most appreciate somebody to check over my answers and see if they are correct or give me some brief input on the ones I don’t know. Thanks for taking your time and helping. Hopefully I’ll pass this test one day
1.You install a ZIP drive into a Windows 2000 system. You install the drivers. On reboot the system locks. You can’t get in, and even safe mode doesn’t work. How do you unload the driver to get back in to Windows 2000 professional? (Choose three)
A. Go into device manager and remove Zip drive.
B. From a command prompt run LISTSVC to disable the zip driver
C. From a command prompt run DISABLE to disable the zip driver
D. Select recovery console from the repair
E. Start the PC from CD-ROM
----Ans :C,D,E
2. You have a system with two monitors, both set for 16-bit color and 1024 X 768 resolution. You decide to set up a DOS application in a DOS Virtual Machine Window. Default DOS configuration is in effect (Default autoexec.nt and config.nt) and the default DOS .PIF file is present. You place the shortcut on the first monitor screen. When you open it the screen goes to scrambled. You move the shortcut to monitor #2 and launching the app locks. What do you need to do?
A. Change both monitors to 256 colors. Configure the application to run full screen
B. Change both monitors to run and optima settings. Configure the application to run full screen
C. Update the drivers for Video card #1 Change #2 to 640 X 480
D. Do something else
----Don’t know the answer to this one. Got any suggestions. I know that Dos has to run in full screen but I don’t know which one to pick.
3. You are upgrading two windows NT4 computers to Windows 2000. Computer 1 completes the upgrade with no problems. During the upgrade of computer 2, you experience a power loss and cannot boot into NT4. You want to use Computer 1 to help Computer 2 recover. How can this be done?
A. Do an across the network install
B. Run MAKEBT32.EXE to make diskettes to start your machine.
C. Copy the boot files from computer 1 to a floppy, boot to the floppy and continue the setup of computer2.
---Ans: B
4. You have ten computers in your organization that are not connected to the internet. The company breaks down and purchases a 56K modem to connect to the Internet. You implement Internet connectivity sharing. Now you can’t see any of the other computers on your network. What do you do?
a. Use IPCONFIG to release and to renew.
b. Disable the shared connection
c. Disable dial on demand.
--I’ve done reasurch and have seen both A and B as correct. What is correct for the test?
5. You are using a dialup connection. You want to insure that your password is encrypted. What protocols from the list below would you disable?
A. PAP
B. SPAP
C. MSCHAP
D. MSCHAP V2
E. For MS based CHAP Protocols
Ans: A,B,E
6. You are using windows installer to deploy an application to 750 windows 2000 Professional computers on your network. The network includes an organizational unit (OU) named sales. A Group Policy object (GPO) is created for the Sales OU. The software deployment of the application is unsuccessful. During the deployment, some users in the Sales OU report that the installation is aborting with random errors midway through the installation process. The remaining users in the Sales OU report that the software is installing, but is giving them general protection fault errors. What should you do?
a. Repackage and re-deploy the application¡¯s .msi file to the Sales OU.
b. Repackage and re-deploy the application¡¯s .mst file to the Sales OU.
c. Re-deploy the application by using the Group Policy object (GPO for the Sales OU.
d. Restart Windows Installer on all computers in the Sales OU. Then re-deploy the application¡¯s .zap file to the sales OU.
Ans:B?
7. You are the administrator of your company’s network. A user named Peter runs windows 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables offline files. Peter calls you from home and reports that copies of his folders and files on the network are not available on his portable computer. What should you instruct peter to do?
a. Enable file and print sharing. Peter will be able to access his files at home immediately.
b. Synchronize all offline files. Peter will be able to access his files at home immediately.
c. At the office, make all files available offline. Peter will be able to access his files the next time he logs off the network.
d. At the office, create a shortcut to the Offline Files folder. Peter will be able to access his files the next time he logs off the network.
Answer: C
8. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should u do?
a. Run rbfg.exe before installing the standard applications.
b. Run riprep.exe before installing the standard applications.
c. Copy the all users profile to the default users profile.
d. Copy the local administrator account profile to the default users profile
Ans: ? Could somebody briefly explain this one.
9. You are the administrator of a Windows 2000 Professional computer that is shared by several users in the sales department. User accounts have been created for current users. Current users can log on to the computers. To accommodate new users, you add two new users accounts named user7 and user8 to the computer5. When user7 attempts to log on o the computer, she receives the following error message: “Windows cannot copy file c:\documents\and Settings\Default User\ to location C:\Documents and Settings\User7. Contact you network administrator. Detail - Access is denied. “ When User8 attempts to log on to the computer, he receives the same type of error message. You want to allow the two new users, as well as other users in the sales department, to be able to log on to the computer. Which two methods can you use to accomplish your goal? (Choose two.)
A. Add the user7 and user8 user accounts to the DACL for the Profiles shared folder on the network server.
B. Add the User7 and User8 user accounts to the DACL for the C:\documents and Settings\Default user folder.
C. Add the everyone group to the DACL for the C:\documents and Settings\Default user folder.
D. Add a group Policy object (GPO) for the Sales OU that redirects user profiles to a shared folder.
E. Log on by using the local Administrator account and create new folders for User7 and User8 in the C:\documents and settings folder
Ans: ? Could somebody briefly explain this one.
10. You are the administrator of your company’s network. You configure a local group named accounting to have a mandatory user profile. The mandatory profile has been configured to include a custom logo that was saved with 16-bit color and 1025x768 resolution. Some of the windows 2000 0Professional computers in the accounting department have standard VGA video adapters, and others have SVGA video adapters. Sever users report that when they log on to certain windows 2000 Professional computers, the custom bitmap becomes very pixilate and distorted, and does not reflect the proper color depth. You want users to be able to correctly view the custom bitmap on any computer in the accounting department. What should you do?
a. Configure a roaming user profile for each user in the accounting group.
b. Configure a separate user profile for each user in the accounting Group.
c. Change the custom bitmap to a 16-color bitmap that has 640x480 resolution, and reconfigure the mandatory user profile
d. Reinstall the appropriate WDM-compliant drivers for the computers that do not display the custom bitmap correctly.
Ans C?
11. You install an external SCSI tape drive. The drivers install OK and the system starts up normally. When you reboot the pc later in the afternoon, you get a blue screen. What to do?
a. Go into device manager and remove SCSI device.
b. Select recovery console and disable the driver with DISABLE command
c. Select safe mode and remove the driver
ANS = C I’m guessing you wouldn’t use recovery mode because the question didn’t say safe mode didn’t work. These questions confuse me.
12. You set up scheduled tasks to run and notify you of any failures. 3 days later you see that none of the tasks ran and you received no notifications. What to do?
a. Set the schedule service to run under the administrator account.
b. Set the scheduled tasks to run under the administrator account.
c. Enable the messenger service
d. Set the schedule service to run under the local system account and set it to start automatically.
This is an answer I saw on a brain dump (ANS = D (because the schedule service wasn’t running, the jobs never ran and therefore didn’t notify you of an error because they never ran in the first place.)) I would think the right answer would be B.
13. You want to upgrade some PCs in your company. They have different Hardware and use different peripherals. How can You check the compatibility with minimizing your work ?
a. Install W2k on all the machines and see what happens.
b. Copy winnt32.exe to a floppy disk and run it on all the machines with the /checkupgradeonlyQ switch. – This is not a spelling mistake, they actually did put a Q at the end of that switch)
c. Use setup manager to create an unattend file, then modify the WIN9XUPG section.
Ans: I know answers a and b are not correct but c doesn’t look right either. Is C correct?
14. Drive C: is nearly filled up, drive D: is quite empty. You want your printer to access drive D: for the spool directory.
a. Print server properties, advanced tab and change the location
b. Printer properties, advanced tab
c. Change c:\winnt\system32\spool to another path on D:
Ans: I think it is B. But I can’t find the answer in my book.
15. You want to install Win2K PRO on X new computers on your company’s network. You first
install Win2K PRO on one of the new computers. You log on to the computer by using
local admin account. You install MS Office 97, a virus scanner, and other company
standard applications. You then create a RIS image of the computer you configured.
You want to configure the RIS image so that the standard applications will be
accessible to the user when the user first logs on to the network.
What should you do?
a) Run RBFG.exe before installing the standard apps
b) Run RIPREP.exe before installing the standard apps
c) Copy the ALL USERS profile to the DEFAULT users profile
d) Copy the LOCAL ADMINISTRATOR account profile to the DEFAULT user profile
Ans:B
16. You are upgrading a computer from Win98 to Win2K. The computer meets the minimum hardware requirements. You are performing the installation using the Win2K PRO cd. After the text mode installation portion is complete, you restart the
computer. The BIOS virus checker on your computer indicates that your computer is
infected with a MBR virus. What should you do?
a) Remove the virus checker in Win98
b) Disable the BIOS virus checker and restart the computer
c) Run FIXMBR.exe from the Win2K PRO cd
d) Modify the Boot.ini to include a signature parameter on the ARC path of the system
partition
Ans In transcender the answer is a and b. But on all the dumps everyone always answers just B. Whats the deal?
17) A used name Tom report that application on his W2P computer are running slowly. You notice Tom's computer has 64 MB of RAM and 100 MB of free disk space. What should you do to improve the performance. (Check all that apply)
A add Tom to the Power user group
B Set the total paging file to 75 % of physical memory
C Perform a disk analysis and use the disk defragmenter if recommended
D Use Disk cleanup to delete tempory files and unnecessary program files
E Ensure that the Performance Options windows is optimised for background services
Ans: C and D. Setting the page file wouldn’t help would it?
18. You install an ISA sound card into your Windows 2000 Professional system. We’re not sure why you did this, just that you did. Sure enough the card fails. You reboot and go into safe mode. What do you do?
A enable driver signing
B disable driver signing
C disable driver and the command prompt
D disable using computer management
Ans D? I ‘m just not sure> Its got to be either C or D
19.You are an administrator that has just received in 100 PC’s with Windows 98 on them. They also have Dual 500Mhz processors on them. Financial realities and human laziness have gone by the wayside, so you decide that you want to upgrade them all up to Windows 2000 Professional. After running setting up a machine you realize that only one of the processors is being seen by the OS what do you do next?
A Run sysprep.exe update the machines after deployment
B Run sysprep.exe with -pnp option
C On the test machine update use device manager to update the system to recognize the second processor. Then run sysprep.exe.
Ans:C
20. Sandy has a roaming profile set up for her Windows 2000 Professional system. Today she is visiting another department, and is Using a Windows NT 4.0 system. All of her roaming profile stuff is missing. What’s the problem?
- 2000 profiles don’t roam to an NT 4.0 machine……That an answer I found on a dump. Is that correct?
21. You want to install Windows 2000 Professional and a service pack on 50 new computers in the shortest possible time. What should you do? (Choose two.)
a. Copy the Windows 2000 source files and the service pack to a shared directory
b. Copy the Windows 2000 source files to a shared directory. Copy the service pack to a separate shared directory
c. Run UPDATE.EXE
d. Run UPDATE.EXE with the /slip switch
Answer A,D
22. You are the administrator of a Windows 2000 network. You are preparing to upgrade a computer running Windows NT Workstation 4.0 to Windows 2000 Professional. What must you do?
a. Run Chkdsk
b. Install Service Pack 5
c. Disable disk compression
d. Remove all antivirus software
Answer is D. Some might be lured into chosing B but remember you only need to have SP 4 or higher installed when you are dual booting with NT and W2K. NT Service Pak 4 is able to access NTFS 5 volumes…..This is somebody elses answer. Are they correct? The question didn’t say it had SP 4 on it. I would think the answer should be B.
Thanks for all your help |
|