|
Home > Archive > CCDA/CCDP > December 2001 > Help me answer 6 CCDA question not easy !
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Help me answer 6 CCDA question not easy !
|
|
| nh_viet 2001-11-13, 5:05 am |
| Please answer help me
Thank you very much!
1/Question ID: ccdaq 1
You are analyzing a network to be redesigned with Cisco technologies. The Firm insists you retain the current routing technology of RIP Version 1 to be compliant with other router platforms still maintained within the current topology. What are adjustments you can make to RIP V1 to make it perform better?
Choose all that apply:
Install EIGRP
Split Horizon
Configure Subnet Masking and summarize
Poison Reverse
Hold Down Timers
2/ Question ID: ccdaq14 When designing ISDN networks with the PPP Protocol, you need to understand the breakdown of what LCP and NCP is. Form the list below, which best describes with LCP is?
LCP is a family of Network layer Protocols
They are frames sent to negotiate and establish connectivity for one or more network-layer protocols
Provides a method of establishing, configuring, maintaining, and terminating the point-to-point connection
Used for establishing and configuring different network-layer protocols
3/ Question ID: ccdaq16
If you were going to design a ISDN based Hunt Group technology to have dial in capabilities at an organization for over 100 dial in calls what would you need to establish this framework?Choose all that apply:
A. MMP
B. ISDN Circuit
C. Cisco 2511
D. AS5000 Series Hardware
E. 30 USR Modems
F. 50 Ethernet connections
4/ Question ID: ccdaq17 When Designing Large scale Campus networks, which of the below choice represent the characteristics of a STP broadcast domain?Choose all that apply:
A. Broadcast storms within the Layer 2 domain affect the whole domain
B. Isolating problems can be time consuming
C. STP convergence typically takes 40 to 50 seconds
D. Redundant links are blocked and carry no data traffic
5/ Question ID: ccdaq18 If you were going to improve the speed on your core routers for packet switching, which technology would you implement on 7000 series router with a SPP and you want to keep processor utilization down as much as possible?
Process Switching
Fast Switching
Silicon Switching
CEF
6/ Question ID: ccdaq19 If you were going to improve the speed on your core routers for packet switching, which technology would you implement on AGS+ series Hardware?
A. Autonomous Switching
B. Fast Switching
C. Priority Caching
D. CEF | |
|
| Possible answers:
ccdaq1:instal EIGRP
ccdaq14:Provides a method of establishing, configuring, maintaining, and terminating the point-to-point connection
ccdaq16:AS5000 Series Hardware
ccdaq17:Broadcast storms within the Layer 2 domain affect the whole domain
Redundant links are blocked and carry no data traffic
ccda18:Silicon Switching
ccdaq19: I don't know what is AGS+!!??
Good luck! | |
| six76 2001-11-24, 10:19 am |
| I found answer in exam notes.
Answer is Autonomous Switching!!!
I hope this will help you  | |
| huntert 2001-12-29, 12:36 am |
| nice |
|
|
|
|