| gbltech 2002-08-23, 10:02 am |
| I have a 2502 router with version 5.2
when it boot up, give and error and goes in boot mode
I change the registry to 0x2102 without result.
here is the errors
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE upe BRI0
Router(boot)#config taddress
Copyright (c) 1986-1995 by cisco Systems, one per line. End with CNTL/Z.t re
2500 processor with 16384 Kbytes of main memoryapi bu
Router(boot)(config)#config-registeri bu
%Error: System flash bank 0 chip 3 unknown, chip id 0xFFFF (reversed = 0xFFFF)ter(boot)(config)#confi
g-register ?interface Serial0:ttp server
<0
%Error: System flash initialization failedut none
line
Rout
2500 processor with 16384 Kbytes of main memory marker.t
interface Serial1
!
sh
Restricted Rights Legendg startup-configokenRing0pt errors
Use, duplication, or disclosure by the Government is ^d
Use this configura
% Invalid input detected
subject to restrictions as set forth in subparagrapha
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
%Error: System flash bank 0 chip 3 unknown, chip id 0xFFFF (reversed = 0xFFFF)
%Error: System flash initialization failed
cisco 2500 (68030) processor (revision D) with 16380K/2048K bytes of memory.
Processor board serial number 04587275 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Token Ring/IEEE 802.5 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of System flash (Device not programmable)
Press RETURN to get started!
Router(boot)>
What should I do ?
Thank you guys again, |