|
Home > Archive > CCNP > April 2002 > Catalyst 1900
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| GFORCE18 2002-04-10, 5:39 pm |
| I have just recently bought the 1900 switch. I am having one hell of time accessing the switch. I have tried a straight, crossover cables, no luck. I have also tried a serial connection, from PC to switch, I dont think the terminal program is configured properly. I cant even get to the prompt for my password. I have tried telnet, http. does anyone have any ideas
thank | |
| vipergg 2002-04-10, 6:05 pm |
| If you are using a laptop or desktop with a serial DB9 connector all you need is a straight thru cable but you will need a null modem adaptor on the db9 end , available at radio shack for about $4 . this will get you in no problem ,also make sure your terminal emulator is the standard 9600,8,n,1 . :-) | |
|
| Rollover cable, db9 connector, serial port(laptop/pc), and hyperterm and you should be good to go! | |
|
| vipergg I paid 40$ for that null modem over here, absolutely, no null modem = no connection period. |
|
|
|
|