|
Home > Archive > CCNP > August 2001 > bscn question very useful quick see!!!!
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
bscn question very useful quick see!!!!
|
|
| deramccie55 2001-08-22, 8:05 pm |
| it is very useful 
and can you have some useful information on cisco?
What are two advantages for using subinterfaces In an NBMA topology? (Choose two.)
a. IP addressing space is conserved.
b. Routing protocols avoid split horizon issues.
c. Logical interfaces are more reliable than physical interfaces.
d. When a subinterface’s state changes to down, the physical interface remains up.
ANSWER:BD
Why is OSPF better than RIPv.1 In a large network? (Choose two.)
a. OSPF requires less memory.
b. OSPF is a simpler protocol than RIPv.1.
c. OSPF has virtually no reachability limits.
d. OSPF supports variable-length subnet masks (VLSMs).
ANSWER:CD
Once the OSPF routing process is enabled, which command selects only the router's
network 10.0.0.0 interfaces to participate In OSPF area O?
a. network 10.0.0.0. 0.0.0.0 area 0
b. area 0 range 10.0.0.0 255.0.0.0
c. network 10.0.0.0 0.255.255.255 area 0
d. network 10.0.0.0 255.2! 55.255.255 area 0
ANSWER:C
When configuring serial 0 for OSPF In NBMA mode, what Is the correct combination of
commands?
a. interface serial 0
ip ospf network non-broadcast
neighbor address
b. interface serial 0
ip ospf network non-broadcast
router ospf process-.id
neighbor address
c. interface serial 0
ip ospf network nbma
router ospf process-id
network number wildcard-mask area number.neighbor address
d. interface serial 0
ip ospf network non-broadcast
router ospf process-id
network number wildcard-mask area number
neighbor address
ANSWER
OSPF routers can route when they are In which state?ഊ7
a. full state
b. two-way state
c. exchange state
d. forwarding state
ANSWER:A
Which OSPF configuration is correct?
a. interface ethernet 0
ip address 10.1.3.2 255.255.255.0 !
interface ethernet 1
ip address 10.1.2.2 255.255.255.0
!
router ospf
network 10.1.2.2 0.0.0.0 area 0network 10.2.3.2 0.0.0.0 area 0
b. interface ethernet 0
ip address 10.1.3.2 255.255.255.0
! interface ethernet 1
ip address 10.1.2.2 255.255.255.0
!
router ospf network 10.2.3.2 0.0.0.0 area 0
router ospf network 10.1.2.2 0.0.0.0 area 0
c. interface ethernet 0
ip address 10.1.3.2 255.255.255.0 router ospf 100
!
interface ethernet 1
ip address 10.1.2.2 255.255.255.0
router ospf 100
d. interface ethernet 0 ip address 10.1.3.2 255.255.255.0
!
interface ethernet 1
ip address 10.1.2.2 255.255.255.0
!
router ospf 100
network 10.1.2.2 0.0.0.0 area 0
network 10.1.3.2 0.0.0.0 area 0
ANSWER
In a multipoint WAN topology using EIGRP, which guideline is used for configuring
bandwidth on a serial interface?
a. configure the bandwidth to be the sum of all virtual circuits
b. configure the bandwidth to be equal to the lowest CIR in the topology
c. configure the bandwidth equal to the link capacity divided b! y the number of virtual
circuitsഊ8
d. configure the bandwidth to be the product of the number of circuits multiplied by the CIR
provisioned for each circuit in the topology
ANSWER
Which feature In EIGRP enables It to reduce the size of the routing table?
a. query scoping
b. hierarchical design
c. route summarization
d. variable-length subnet mask (VLSM)
ANSWER:C
When does an EIGRP router discover its neighbors?
a. when it receives a hello packet from the neighbor
b. when it receives a full routing table from its neighbor
c. when it receives an acknowledgment for one of its transmitted hello packets
d. Due to the reliable nature of EIGRP, neighbor relationships are not required.
ANSWER:A
You want to configure EIGRP for IP. Which command enables EIGRP and defines the
autonomous system?
a. router eigrp autonomous-system-number
b. config eigrp autonomous-system-number
c. router ip eigrp autonomous-system-numb! er
d. config ip eigrp autonomous-system-number
ANSWER:A
How can route summarization be performed in a EIGRP network?
a. manually at any interface within the network
b. only at autonomous system boundary routers
c. automatically by the master router in each area
d. Route summarization is not required because of EIGRP support of
ANSWER:A
You are configuring EIGRP for NBMA operation. What Is the purpose of the ip
bandwidth-percentage eigrp command?
a. It adjusts the percentage of bandwidth that EIGRP packets can use on all of the router’s
interfaces.
b. It adjusts the percentage of bandwidth that EIGRP packets can use on an individual
router interface.
c. It overrides the bandwidth setting on an interface to ensure that EIGRP packets receive
50% of the available bandwidth on the router’s interface.
d. It limits the percentage of bandwidth that EIGRP packets can use. The percentage
cannot exceed 50% of the configured bandwidt! h on all of the router’s interfaces.ഊANSWER:B
Which entries are kept In an EIGRP routing table?
a. all leaned routers
b. successor routes only
c. feasible successor routes only
d. successor and feasible successor routes
ANSWER:B
When a route is said to be stuck In active, which EIGRP condition has occurred?
a. The feasible successor router is not responding to update packets.
b. The route compilation process is taking longer than usual to complete.
c. The hold time has expired and a neighboring router has been marked as inactive.
d. A neighboring router has failed to respond to a query about the route within three
minutes.
ANSWER
How does an EIGRP router determine when a neighbor Is unavailable?
a. when the hold time is exceeded
b. when the queue value exceeds 0
c. when the queue value is constantly at 0
d. when the round trip timer exceeds 500 milliseconds
ANSWER:A
You have configured policy-based routing o! n Interface Serial 0.Given the configuration:
Interface serial 0
ip policy route-map demo
route-map demo permit 10
match ip address 4
set interface serial2 serial3
Which statement about a packet arriving on serial 0 Is MOST correct?
a. If the packet were sourced from 10.3.3.2, it is a candidate for fast-switch policy routing.
b. If the packet were sourced from 10.3.3.2, it will be routed out interface serial 2 and
interface serial 3 in a load-sharing fashion..
c. If the packet were sourced for 10.3.3.2, it will be routed out interface serial 2 and
interface serial 3 in a load-sharing fashion.
d. If the packet were sourced from 10.3.3.2, it will be routed out interface serial 2. If
interface serial 2 is not up, the packet will be routed out interface serial 3.
ANSWER | |
| deramccie55 2001-08-22, 8:23 pm |
| comment!!! | |
| MadChef 2001-08-23, 5:12 am |
| quote:
Originally posted by deramccie55
comment!!!
OK. I have a comment.
When you post a list of dozen random questions and ask them to be explained, people are going to ignore your post. Ask specific questions about items with which you are concerned if you want to generate a discussion about them.
MadChef | |
| dmaftei 2001-08-23, 8:00 am |
| quote:
Originally posted by deramccie55
comment!!!
You must be kidding... LOL | |
| deramccie55 2001-08-23, 8:30 am |
| they are real question .
i think that ccnp is very easy for me | |
| dmaftei 2001-08-23, 8:48 am |
| quote:
Originally posted by deramccie55
they are real question .
So, this would qualify your original post as "braindumps", right?
quote:
i think that ccnp is very easy for me
Good for you... | |
| depamo 2001-08-24, 7:13 pm |
| Man, you are from Sweden?? That is cool but what in the heck to you want??
Do you want the answers to the questions that you didn't have answers for or what??
If you want answers to the questions that you didn't answer, just let us know. On the other hand, does Sweden really have all those hot women with blond hair or is it just TV hype??
About need a translator for this one. |
|
|
|
|