|
Home > Archive > CCNP > August 2001 > new in forum
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| ccnpman 2001-08-12, 10:41 am |
| Hi all,
I am new in the forum, and have several problems need to be solved as soon, any idea is welcome, thanks.
1. I have several workstations attached to a cisco switch(Cat 29xx), when the workstation boot up, it will auto. login the workstation, and run a startup script to map a novell server. There is a problem that the workstation can't map the novell server which is attached in the same switch, but when I disable the startup script and run the script manually after the workstation bootup, it can map to novell server succesfully. I have also tried to speed up the switch port by enabling portfast feature and disable spantree in the switch, but the problem still the same. It is urgent to me, any idea is welcome to me to fix the problem, thanks.
2. I have also a 2600 cisco router, but there is no ipx function I can enable in the router, e.g. when I type in #ipx routing, it prompt me no such command, what is the problem, is ios not supported or others? | |
| Quintoh 2001-08-12, 12:18 pm |
| Seems like they are related. Make sure that when you do the ipx routing command that you are in config mode, otherwise it won't understand it.
Try that and we'll c if everything else is ok.
HTH
Quintoh | |
| peterd 2001-08-13, 2:11 am |
| Hi,
also check that your IOS supports IPX, it could be IP only in which case you'll need to upgrade it.
Regards
Peter | |
| ccnpman 2001-08-13, 2:38 am |
| Is ipx default supported in IOS? And how can I check it? by IOS version? | |
| Retired-Mod 2001-08-13, 3:31 am |
| There are IOS versions for IP only and I suspect that is what you have on your router. If a command is not available it is not supported either by the hardware or the IOS (in your case IOS). The letters in the IOS version indicate what it supports.
Retired | |
| ccnpman 2001-08-13, 10:13 pm |
| thanks, and the ios version code of my 2600 router is C2600-IO3-M, how can I know that whether ipx is supported?
Ken. | |
| ccnpman 2001-08-13, 10:17 pm |
| version is 12.1(5)T9 and code is C2600-IO3-M | |
|
| If what I remember is not wrong, the character "I" in your code name means IP only. So, that's why you cannot run IPX on your router. If you want to run IPX, you need desktop IOS version. Anyway, check CCO for sure.
Hope this help, | |
| ccnpman 2001-08-14, 11:20 am |
| thanks for you all reply | |
| meyerc13 2001-08-14, 11:59 pm |
| As for your first question, where are you running this script from? I would recommend a NetWare login script, either container, user, or profile. If you aren't using a NetWare login script, it is possible that your script is attempting to run before authentication is complete with the NetWare server. By using a NetWare login script, you know it won't attempt to run it until the user is authenticated. | |
| The Reamer 2001-08-17, 11:17 am |
| Here is a list of the letters in the image name and what they mean for feature sets. I copied this from Cisco's site.
Hope it helps.
Reamer
a a APPN
a2 ATM
a3 APPN replacement
b b Appletalk
boot boot image
c c Comm-server/Remote Access Server (RAS) subset (SNMP, IP, Bridging,IPX, Atalk, Decnet, FR, HDLC, PPP, X,25, ARAP, tn3270, PT,
XRemote, LAT) (non-CiscoPro)
c CommServer lite (CiscoPro)
c2 Comm-server/Remote Access Server (RAS) subset (SNMP, IP, Bridging,IPX, Atalk, Decnet, FR, HDLC, PPP, X,25, ARAP, tn3270, PT,
XRemote, LAT) (CiscoPro)
c3 clustering
d d Desktop subset (SNMP, IP, Bridging, WAN, Remote Node, Terminal
Services, IPX, Atalk, ARAP)
(11.2 - Decnet)
d2 reduced Desktop subset(SNMP, IP, IPX, ATALK, ARAP)
diag IOS based diagnostic images
e e IPeXchange (no longer used in 11.3 and later)
- StarPipes DB2 Access - Enables Cisco IOS to act as a "Gateway" to
all IBM DB2 products for downstream clients/servers in 11.3T
eboot ethernet boot image for mc3810 platform
f f FRAD subset (SNMP, FR, PPP, SDLLC, STUN)
f2 modified FRAD subset, EIGRP, Pcbus, Lan Mgr removed, OSPF added
g g ISDN subset (SNMP, IP, Bridging, ISDN, PPP, IPX, Atalk)
g2 gatekeeper proxy, voice and video
g3 ISDN subset for c800 (IP, ISDN, FR)
h h For Malibu(2910), 8021D, switch functions, IP Host
hdiag Diagnostics image for Malibu(2910)
i (used for image names of platforms c2500 and larger) i IP subset (SNMP, IP, Bridging, WAN, Remote Node, Terminal Services)
i2 subset similar to IP subset for system controller image (3600)
i3 reduced IP subset with BGP/MIB, EGP/MIB, NHRP, DIRRESP removed.
i4 subset of IP (5200)
ipss7 IP subset with SS7 (2600)
j j enterprise subset (formerly bpx, includes protocol translation)
*** not used until 10.3 ***
k k kitchen sink (enterprise for high-end) (same as bx) (Not used after 10.3)
k1 Baseline Privacy key encryption (On 11.3 and up)
k2 high-end enterprise w/CIP2 ucode (Not used after 10.3)
k2 Triple DES (On 11.3 and up)
k3 56bit SSH encryption
k4 168bit SSH encryption
k5 Reserved for future encryption capabilities (On 11.3 and up)
k6 Reserved for future encryption capabilities (On 11.3 and up)
k7 Reserved for future encryption capabilities (On 11.3 and up)
k8 Reserved for future encryption capabilities (On 11.3 and up)
k9 Reserved for future encryption capabilities (On 11.3 and up)
l l IPeXchange IPX, static routing, gateway
m m RMON (11.1 only)
m Catalyst 2820-kernel, parser, ATM signaling, Lane Client, bridging
n n IPX
o o Firewall (formerly IPeXchange Net Management)
o2 Firewall (3xx0)
o3 Firewall with ssh (36x0 26x0)
p p Service Provider (IP RIP/IGRP/EIGRP/OSPF/BGP, CLNS ISIS/IGRP)
p2 Service Provider w/CIP2 ucode
p3 as5200 service provider
p4 5800 (Nitro) service provider
p5 Service Provider (6400 NRP)
p7 Service Provider with PT/TARP (2600, 3640)
q q Async
q2 IPeXchange Async
r r IBM base option (SRB, SDLLC, STUN, DLSW, QLLC) - used with
i, in, d (See note below.)
r2 IBM variant for 1600 images
r3 IBM variant for Ardent images (3810)
r4 reduced IBM subset with BSC/MIB, BSTUN/MIB, ASPP/MIB, RSRB/MIB removed.
s s source route switch (SNMP, IP, Bridging, SRB) (10.2 to 11.1)
s Additions by Platform via PLUS packs
c1000 (OSPF, PIM, SMRP, NLSP, ATIP, ATAURP, FRSVC, RSVP, NAT)
c1005 (X.25, full WAN, OSPF, PIM, NLSP, SMRP, ATIP, ATAURP, FRSVC, RSVP, NAT)
c1600 (OSPF, IPMULTICAST, NHRP, NTP, NAT, RSVP, FRAME_RELAY_SVC)
AT "s" images also have: (SMRP,ATIP,AURP)
IPX "s" images also have: (NLSP,NHRP)
c2500 (NAT, RMON, IBM, MMP, VPDN/L2F)
c2600 (NAT, IBM, MMP, VPDN/L2F, VOIP and ATM)
c3620 (NAT, IBM, MMP, VPDN/L2F) In 11.3T added VOIP
c3640 (NAT, IBM, MMP, VPDN/L2F) In 11.3T added VOIP
c4000 (NAT, IBM, MMP, VPDN/L2F)
c4500 (NAT, ISL, LANE, IBM, MMP, VPDN/L2F)
c5200 (PT, v.120, managed modems, RMON, MMP, VPDN/L2F)
c5300 (MMP, VPDN, NAT, Modem Management, RMON, IBM)
c5rsm (NAT, LANE and VLANS)
c7000 (ISL, LANE, IBM, MMP, VPDN/L2F)
c7200 (NAT, ISL, IBM, MMP, VPDN/L2F)
rsp (NAT, ISL, LANE, IBM, MMP, VPDN/L2F)
t t AIP w/ modified Ucode to connect to Teralink 1000 Data (11.2)
t Telco return (12.0)
u u IP with VLAN RIP (Network Layer 3 Switching Software, rsrb, srt, srb, sr/tlb)
v v VIP and dual RSP (HSA) support
v2 Voice V2D
v3 Voice Feature Card
v4 Voice (ubr920)
w w WBU Feature Sets
i IISP
l LANE & PVC
p PNNI
v PVC trafffic shaping
w2 Cisco Advantage ED train Feature Sets
a IPX, static routing, gateway
b Net Management
c FR/X25
y Async
w3 Distributed Director Feature Sets
x x X.25 in 11.1 and earlier releases and on c800 in 12.0T
x FR/X.25 in 11.2 (IPeXchange)
x H.323 Gatekeeper/Proxy in 11.3 and later releases for 2500, 3620, 3640, mc3810
y (used for image names of platforms smaller than c2500) y reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, ISDN, PPP) (C1003/4)
y reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, WAN - X.25) (C1005)
(11.2 - includes X.25) (c1005)
y IP variant (no Kerberos, Radius, NTP, OSPF, PIM, SMRP, NHRP...) (c1600)
y2 IP variant (SNMP, IP RIP/IGRP/EIGRP, WAN - X.25, OSPF, PIM) (C1005)
y2 IP Plus variant (no Kerberos, Radius, NTP, ...) (c1600)
y3 IP/X.31
y4 reduced IP variant (Cable, Mibs, DHCP, EZHTTP)
y5 reduced IP variant (Cable, Mibs, DHCP, EZIP) Home Office
y6 reduced IP variant(c800)
z z managed modems
0-9 40 40 bit encryption
56 56 bit encryption
56i 56 bit encryption with IPSEC
Obsolete h reduced desktop subset (SNMP, IP RIP/IGRP/EIGRP, Bridging,
ISDN, PPP, IPX, Atalk) 1003/4
h reduced desktop subset (SNMP, IP RIP/IGRP/EIGRP, Bridging,
WAN - X.25, IPX, Atalk) 1005 |
|
|
|
|