|
Home > Archive > CCNA > April 2001 > r1r2.com
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| navodit 2001-04-23, 8:05 am |
| Hi all
When I telnet to r1r2.com labs,
I always find password at router enable prompt,after giving 'cisco' and 'ccna'
passes.
So how can I move to that lab routers by breaking the configuration passwords of routers, Mine is Office Computer , And many guys work on it, There is some way to power up the router again and starting with default configuratuion.
Please help.
Navodit | |
| creamy_stew 2001-04-23, 10:49 am |
| You now have an excellent opportunity to learn how to perform password recovery!
The info you need is on r1r2.com (lab exercises)
/creamy | |
| navodit 2001-04-24, 11:34 am |
| Dear Creamy
Please tell me how and when the brak button on keyboard should be pressed i.e. when I will know that router is powered up, Is i that when the telnet says
" Press the return for Router Prompt"
So when should I press break button ??????
Navodit | |
| creamy_stew 2001-04-24, 12:05 pm |
| Navodit,
The main thing to remember is that you cannot use the BREAK key, you have to use the "escape sequence" for BREAK which is:
1)press and hold the CTRL, SHIFT and 6 keys
2)release the above keys
3)Press b
This should cause the router to power-cycle (restart)
Now wait for the router to report its memory size and then repeat steps 1-3 above. This should take you to the somewhat whacky mode known as rom monitor.
/creamy |
|
|
|
|